Rearsets swap or buy - Got SV650-SK3, want Naked set

[Tallguy]

I want to lower my footpeg position for comfort and understand that the naked position is slightly lower than the half-dressed position (hehehehe :smt081)

I'd like to swap, or buy, the kit needed to change my SV650-SK3's pegs/brake pedal/gear change to the lower position.

Anybody breaking/trackdaying/minitwinning a naked and need the higher pegs?

I'm getting older, fatter and taller. Well, not taller, but 6ft5in is tall enough to get cramped on longer rides.

Post here or PM me - or has anyone got any other ideas that are cheap 'n' cheerful?

Tallguy :rolleyes:

[Gaz.sv650]

I've got just a left 650N rearset if it helps

[Winder]

Type " SV650 riser plate" into eBay search. They move the rear sets up 1" and back 1" or flip them round for 1" down and 1" forward which is what your after. Think a few people have used them on her before

[Tallguy]

Gaz, thanks, I'm not sure whether to take just one and look for the other one so I'll have a think. TA for the offer, what would you want for it?

Winder, I was directed to these, I'm interested but they say "grinding required" if used reversed so I'm thinking about that too!

Anyone got just a right side N rearset..?

[srobrien]

I just bought some GSX-R aftermarket rearsets, had to do a bit of fettling to make them fit but they seem a good bit further back and lower with tonnes of adjustment holes.

R

[Gaz.sv650]

Type " SV650 riser plate" into eBay search. They move the rear sets up 1" and back 1" or flip them round for 1" down and 1" forward which is what your after. Think a few people have used them on her before

+1 I forgot about them this might be your best bet

[Tallguy]

Getting a set from forumite, he couldn't get them to fit reversed on his so I'll have a go and if I can't do it I'll stick em on here!