PDA

View Full Version : Pointy Bits :)


Beetrootkiller
01-03-12, 08:44 PM
Hi all,

After several modifications to my bike I have ended up hauling a lot of spares and bits, so finally having a clear out :)

All the following bits are off of a K4 SVS and may or may not fit other years, I'm sure people can clarify this.

All the following parts are + standard postage OR pick up from Dursley (Gloucestershire) or Yate (Bristol) or Tetbury (Gloucestershire):

Original Mirrors, Left and Right. Good used condition - £10 for one or £18 for both

R & G Crash Bungs for SV's without lower fairing, small scuff on one side £20

http://img545.imageshack.us/img545/9017/img0325ma.jpg


http://img38.imageshack.us/img38/4697/img0326rf.jpg
Bar ends few marks £5

http://img710.imageshack.us/img710/2960/img0346pw.jpg


Original Clear Screen, good condition the odd mark no cracks or chips £20


http://img9.imageshack.us/img9/446/img0323kf.jpg

Metal bits to go on end of swingarm, forgot their name SOLD



Original Brake Lines, Good condition £5

http://img197.imageshack.us/img197/2424/img0342nf.jpg

Front brake calipers, pads, front M/C and brake fluid all sealed £60

http://img714.imageshack.us/img714/3277/img0343wk.jpg

Bottom Yoke and bearings, all in tact and good condition £25

http://img846.imageshack.us/img846/5278/img0344h.jpg

Top yoke slight marks £25

http://img707.imageshack.us/img707/3030/img0345nw.jpg

Front fender (YU9) + pyramid fender extender, small mark on the front £35

http://img52.imageshack.us/img52/5063/img0347ip.jpg

http://img859.imageshack.us/img859/6372/img0348il.jpg

Speedo sensor, one bit missing, still works perfect. £8

http://img703.imageshack.us/img703/1087/img0350wo.jpg

Right clip-on only now £10

http://img710.imageshack.us/img710/2485/img0352gz.jpg

TL1000R Left clip-on £10

http://img804.imageshack.us/img804/9616/img0353w.jpg

GSXR 1000 K4 Left clip-on £10

http://img546.imageshack.us/img546/8592/img0354ok.jpg

Brake Lever SOLD



Tail Tidy, full working order just plug in. SOLD




Thanks :)

George

Runako
01-03-12, 09:02 PM
I'll take that Tail Tidy of you for £12 and in Bristol Saturday so if you're game I'll pop over to Yate and relieve you of it ;)

Beetrootkiller
01-03-12, 09:07 PM
£15 and it's a deal, seeing as I just mistakingly bought it for £20!

kiggles
01-03-12, 10:16 PM
you have a pm

Beetrootkiller
01-03-12, 10:24 PM
you have a pm

As do you :)


---
I am here: http://tapatalk.com/map.php?dtuthf

Tomor
02-03-12, 12:05 AM
Pm'd

sv simon
02-03-12, 11:33 AM
has the tail tidy gone

Beetrootkiller
02-03-12, 11:42 AM
has the tail tidy gone

Provisionally sold, I haven't heard back yet but should be picked up Saturday, if it isn't I'll let you know.

sv simon
02-03-12, 11:52 AM
ok thanx

FahimW
02-03-12, 12:41 PM
I will take the brake lever and the swing arm bobins please.

Runako
02-03-12, 01:26 PM
Provisionally sold, I haven't heard back yet but should be picked up Saturday, if it isn't I'll let you know.

PM'd now mate. Cheers!

Beetrootkiller
03-03-12, 06:58 AM
I will take the brake lever and the swing arm bobins please.

Sorry brake lever sold although can still do the bobbins,

PM me if your still interested

George

FahimW
03-03-12, 06:28 PM
PM sent.

Beetrootkiller
04-03-12, 05:48 PM
Oh I also have the standard mirrors for sale, both in good used condition, £10 each or £18 for both + postage.

Beetrootkiller
05-03-12, 06:43 PM
Bump to the top :)

Beetrootkiller
07-03-12, 05:44 AM
Bump, still for sale :)

joe_f59
07-03-12, 01:11 PM
How much for the fender extender by itself? If you're willing to remove

Beetrootkiller
07-03-12, 08:35 PM
How much for the fender extender by itself? If you're willing to remove

Give it a few days and if it doesn't sell I'll send you a PM. :)


---
I am here: http://tapatalk.com/map.php?wzctxc

Tomor
07-03-12, 09:52 PM
Lever received this morning, Thanks!

Beetrootkiller
08-03-12, 09:38 PM
Lever received this morning, Thanks!

Your welcome :)

(Bump)

SV_Dave
10-03-12, 11:11 AM
Are the bar ends still available? Is it just the one that's scratched?

Beetrootkiller
10-03-12, 11:32 AM
Are the bar ends still available? Is it just the one that's scratched?

Yes they are still available, and that's the only noticeable mark on both.

:)


---
I am here: http://tapatalk.com/map.php?5y5c22

joe_f59
16-03-12, 05:49 PM
Any joy on the fender extenda?

Beetrootkiller
19-03-12, 01:03 PM
Any joy on the fender extenda?

Sorry it took a while to post back,

The fender extender is available and I'll get it ready for you if you want it..

£8+postage. :)

joe_f59
22-03-12, 04:26 PM
£10 posted shall we say?

allantheboss
23-03-12, 02:47 AM
How used are the front brake calipers, lines and cylinder? Pads in there, and if so, are they in need of replacing?

Beetrootkiller
23-03-12, 06:59 AM
How used are the front brake calipers, lines and cylinder? Pads in there, and if so, are they in need of replacing?

Bike has done 22000 miles, the pads have plenty of life left in them I would say 30% worn.

The kit only came off because I did the GSXR swap. It worked perfectly before :)


---
I am here: http://tapatalk.com/map.php?53nr0n

dwhitt
31-03-12, 08:53 AM
PM'd. I take the screen too if still available. Cheers

Beetrootkiller
31-03-12, 09:15 AM
PM'd. I take the screen too if still available. Cheers

Pm'ed right back at you... Bungs aren't available sorry but the screen is.


---
I am here: http://tapatalk.com/map.php?ll5qmf

allantheboss
05-04-12, 02:19 PM
I'll take the crash bungs please. PM me your paypal/bank deets

Beetrootkiller
05-04-12, 07:46 PM
Sorry allan, they've sold. I will update the post soon with what is still available.

regards,

George

Dave_es94
14-05-12, 11:02 PM
would you do the bar ends for £5 posted? is atleast one of them not damaged at all?

Beetrootkiller
15-05-12, 03:59 AM
Sorry bar ends are sold.

scully19
28-07-12, 02:54 AM
You still have the speedo sensor for sale?

Beetrootkiller
28-07-12, 05:36 AM
Wow I had forgotten about this thread!

Yes I'm fairly sure I do, I'll have a look for it and PM you later today if I can find it.

Thanks.

joe_f59
02-08-12, 06:48 AM
hi, would you separate the M/C from those calipers at all?

im4u2nv
28-08-12, 05:08 AM
What year is the clip on coming from? Do you have the left one as well? I am looking for a pair.

Would you consider send it to Denpasar, Indonesia? Any idea on how much would the shipping cost be? Of course I would pay the shipping cost.

Thank you.

Beetrootkiller
28-08-12, 07:55 AM
I've only got the right one.

It's from a sv650s 2004.

I would post there if you were still interested.

Thanks