View Full Version : CLEAR OUT! Lots of stuff... CURVY!
MRedhead
21-03-12, 12:47 PM
Right, getting rid of one of my SV's, got a Hornet and I don't need 2 :D, so I'm gonna sell on all the spare stuff in my loft, cause I wont be needing it.
All bodywork is from a Yellow 99 Curvy
The bodywork is off a cat B write off, but the only damage was the forks bent below the bottom yoke and cracked the wheel, everything else was fine, you know what insurance companies are like!
list is as follows:
Clocks - Glazed odometer cover - would need bulbs for dials - £85/£90
Dash cover - £20
Brake levers x2 - £10 each
Left Rear panel (with lock included) - £30
Right rear panel - £30
Centre black panel - £10
Rear light - £10
Grab rail - £15
Top yoke - £20
Bottom yoke and stem - £30
Speedo drive & cable - £35
left rear footrest - £15
Right rear footrest - £15
Front wheel spindle - £10
Frame (Cat B write off. Would make fine track bike frame, any questions, feel free to ask)
PM for details and further arrangements.
Thanks
Mike
Do you know the colour code for the front right fairing and the rear right fairing? Is it Y9H? I'll have it if it is! :) Buggrit, I'll have the brake levers too... no prizes for guessing what happened this afternoon ;(
brythered92
01-04-12, 01:08 PM
big fan of this ;) x
MRedhead
01-04-12, 01:48 PM
Hi 85, (ill call you that ;)) I beleive it is Y9H but I can find out for you. Like I say, they're not that yellow, theyre sprayed, but with a sticker set and a good spray they'd be like new. The rear panel is the right yellow so that wont need it, unless of course you want it as good as new. Ill PM you a bit later if youre still interested :)
Mike
MRedhead
16-04-12, 02:24 PM
fairings
MRedhead
16-04-12, 02:25 PM
moar fairings
Have you got a front wheel?
MRedhead
19-04-12, 02:12 PM
Have you got a front wheel?
No mate unfortunately, well, I do, but its bent and has a massive crack in it... :salut:
Sorry
Mike
fergy150
01-05-12, 11:50 PM
Have you still got the left front fairing for sale?
MRedhead
02-05-12, 09:13 AM
HI sorry mate fairings have gone :/
Mike
m`baubz
02-05-12, 09:54 AM
how about the fork lowers? did you get a chance to check 'em out?
Wondering if you have the front left footrest and bracket?
MRedhead
03-05-12, 04:45 PM
I think the fork lowers are all good mate, and lexism I'm looking for the front footrest and bracket myself! sorry!
Mike
I think the fork lowers are all good mate, and lexism I'm looking for the front footrest and bracket myself! sorry!
Mike
Ended up fixing the footrest with a bodge job.
The other item I need now is the speedo drive, I'd happily buy it if you're not too far away and I could pick it up tomorrow.
MRedhead
06-05-12, 08:56 PM
Ah sorry dude, iv just got back on here! Im in Portsmouth so how far is that for you? If not would you still want to buy it?
Mike
MRedhead
14-06-12, 07:31 PM
Bump
Hi, it's not mentioned but do you have a torque bar for the back brake?
MRedhead
18-06-12, 09:15 AM
Not one available no, that's being used in the rebuild! Sorry!
Mike
JamesMio
19-06-12, 03:21 PM
Have you got the wee bolts that hold the seat infill panels in place by any chance? (the two wee side grill bits)
MRedhead
19-06-12, 09:17 PM
No mate sorry, they're being used in the rebuild, it's literally the stuff thats in the list.
Just look for general fairing bolts, they all fit :), I'm using some of the SV ones on my side panels for my Hornet.
Mike
might need the front sub frame if you still have it - will know more in a couple of weeks when the bike's stripped.
MRedhead
13-07-12, 05:00 PM
Okaay dude no worries, let us know.
Mike
Hi,the pillion seat, still have it? does it still have the fittings etc underneath? as that's all i want for my seat cowl would you sell separate or as whole,if so best price for both.also will send money over on pay day as ive had an expensive month! (and missis will tell me off)
MRedhead
15-07-12, 10:39 PM
hi, yes I still have the pillion seat, the fittings as far as im aware are part of the seat, unless there's something I don't know about. I still have the entire back end so I think the answer is just simply, yes.
Mike
Do you still have the grab rail!? I'm picking up my SV 2009 K9 on Wednesday and I'm super excited! But I need that grab rail to take pillion! Will I be able to use yours? I'm new to this so please be gentle!
Please do let me know! Thanks!
MRedhead
16-07-12, 06:33 PM
Hi mate,
Replied to your inbox so check that out.
Mike
Do you still have the grab rail!? I'm picking up my SV 2009 K9 on Wednesday and I'm super excited! But I need that grab rail to take pillion! Will I be able to use yours? I'm new to this so please be gentle!
Please do let me know! Thanks!
curvy wont fit k9 though :confused:
Thanks Mike!
And thanks leebex! smarty0121 was kind enough to pm me that info!
Thanks for the heads up! :notworthy:
Sizzle Media
17-07-12, 12:54 PM
have you still got the clip ons? fancy changing the bar out for a more of sporty posture :)
do you by any chance have the brake fluid reservoir?
and would you sell it if you did?
MRedhead
17-07-12, 10:11 PM
Believe I should have the reservior, i'll have a look and check, then i'll let you know!
Yes i'd sell it.
Mike
Mike, can you send me some pictures of the headlight unit please, just discovered tonight that mine is fooked. Is your front sub-frame straight or bent?
Any negotiation on a price for a job lot inc light unit, front subframe, brake fluid res (if you have it)?
Drop me a pm if it's easier. many thanks.
Jen
James the kiwi
20-07-12, 02:34 PM
Hi Mike,
Did that pillion seat go in the end?
Cheers, James
MRedhead
22-07-12, 04:00 PM
Hi James, I still have it, are you interested?
Mike
Do you have the original riders seat?
MRedhead
22-07-12, 10:14 PM
I do, It has some slide tears where its been cut down for a short previous owner.
Mike
MRedhead
11-08-12, 10:18 AM
Bump
Springbokki
11-08-12, 10:25 AM
Sorry, to be a pain, but whats left?
MRedhead
27-08-12, 09:32 PM
the list has been updated, whats on there now is what's left :)
Mike
vBulletin® , Copyright ©2000-2025, Jelsoft Enterprises Ltd.