Datatool System 3 fob sync?

[buzz88]

I have a K3 with a Datatool System 3 installed. I have one fob out of 3 that works with it and i am just wondering if anyone knows how i can sync the other two to the alarm. Thanks

[DJ123]

search online, there is a manual somewhere which tells you how to do it. it's pretty complex AFAIK

[ruddlad]

If it's like mine you have to connect a wire to the battery and the trigger switch usually under the rear the seat, then follow the procedure attached. I had same issue and thought it was very primitive so got a guy out who did it for me. It seems a strange way but it really is very simple, I was charged £25 which I was happy to pay for a specialist to show me how. 11060

[buzz88]

Does anyone have any photos of how to do it?

[ruddlad]

I didn't take any but here is a rundown for how I did mine. (tip: get a friend to help)

Removed rear seat, connected a wire to the trigger switch (some say you have to strip the wire, you don't, just hold it to the base of the switch on a connection) and the other end to the battery positive (just hold it on)

Then followed the instructions from the file I attached.

I was really dubious and nervous as it sounded so primitive, hence why I got an alarm guy out. He hadn't done one before and was determined to sort it. The first attempt did not work as he hadn't made a good contact with the trigger switch but we did both fobs straight after with no problems.

If you're ever in Nottingham I am happy to run through it with you.