PDA

View Full Version : Shed clearout pointy parts


todsky426
07-08-12, 07:43 PM
Hey guys got some parts for sale sold my beloved 09 SV now.

Beowulf stainless radiator guard that i believe will fit 2008 aswell. £50 ono

Renntec sports luggage rack £50 ono

I have a shed full of spares that i bought listed as SV650 K3N since not major differences i bought spares upon spares. You guys will know what years fit which etc.

£100 for the lot below now, really need the space in my shed now

Original exhaust off my k9, with connection sleeve.

I have Front and read cylinder including 2 very good pistons and rings, 2 good cylinder heads, rocker covers, cam chains and guides.

There is another cylinder head with 1 bent valve must be good for spares to someone.

Swingarm plus engine/ frame pivot bolt and rear axel, rear brake caliper.

Clear screen with very minor scuff on it can hardly see it.

Complete sidestand switch wires etc.

Fuel injection throttle bodies including all push fit fuel piping.

Have got spares for cooling system spare rad cap, few pipes, thermostat etc.

Wiring parts, front headlight loom, headlight rubber surrounds, battery terminal leads, left hand switchgear.

Odd bottom end parts, oil pump, box full of different gears, gear selector shaft.

Also included is what used to be a full seat of forks, i crashed and one stanchion was bent so its basically a bottom yoke, 1 complete fork leg, 1 fork lower from the other side + spring and all bushes, fasteners etc.

All this gear would be ideal for somebody with a damaged bike or somebody building a minitwin for spares or something.

Really i want to sell the whole lot rather than splitting seperate parts, there is alot of moneys worth here, I'm asking £250 for the lot and am open to any offers, the stuff would have to be picked up by the buyer, i am in Bolton, manchester. Just ask if you want any pics.

Cheers guys.

speedyctr
07-08-12, 08:04 PM
Am i reading it right that the top two items are available seperatley? If so how much for Renntec? I can collect.

todsky426
07-08-12, 08:20 PM
Yeah sorry mate i thought i had put a price, it cost me £90 so would be looking for £50 ono

speedyctr
07-08-12, 08:37 PM
PM'd

todsky426
20-08-12, 08:32 PM
anybody interested in anything all these parts are in my way now

MetalJonesy
21-08-12, 01:42 PM
would you be willing to pull parts off the throttle bodies? Really need a couple of vacuum port caps/clips

femaleacid
21-08-12, 01:50 PM
.

welshman85
25-08-12, 04:46 PM
Hi. Is the renntec rack still on offer?

femaleacid
25-08-12, 06:44 PM
SCTR has beat you to it lol, sorry dude :(