Full beam light on and headlights on and no keys in ignition :/

[Joe Marcon]

My main beam light came on, on way home. I turned engine off and on and went off . Got home jumped in bed and mum says some lights ar on . Go to bike and headlights on and full beam sign is on, no keys in ignition . Just disconnected battery for now . Ive got HID kit on bike so wonder if its that? But i disconnected the negative side of the hid to battery and light go off but the full beam light on dash stays on :/ :S wierd . Any answer be great
Sv650 curvy . 2000 plate

[Grant66]

HID lights will be switched by a relay, find it and see if it clicks on removal ( when the battery connected), if it does its permanently fed. Up to this point the wiring should be as standard curvey.
Work back from there ( there is a circuit diagram on the internet) and find the point where the circuit has the short.
If no click from relay problem is after the relay. Somewhere.
Check for chaffing of the loom in the usual places.
Hope that helps.

[Joe Marcon]

The hid has been working fine for a week :/

[yorkie_chris]

Possibly bad diode on relay for main beam. Maybe. Can't remember exact wiring.