daz611
01-09-12, 04:35 PM
I have been unable to upload pics so if you would like to have a look at her then you can see her on ebay, item number 180961702284
Mileage: 1,859
Reg. Date: 19/05/2012
Warranty: 19 Months Remaining
Road Tax: 3 Months Remaining
I am selling my pride and joy as my partner and I have decided to save up to buy a house. This SV650 is a stunning bike, great for a blast out on twist roads or for commuting to work (60 plus miles to the gallon). She has had no expense spared on her as you will see from the list below....
M4 High Sport full system with stainless tubing and CARBON muffler
K&N Air Filter
Power Commander
Oxygen O2 Eliminator (Required to extinguish “FI” light)
Dyno Tuned by BSD Performance
Goodridge front race brake lines with stainless steel fittings
Goodridge rear brake line with stainless steel fittings
Pro BoltFront brake stainless steel bleed nipples 7mm
Pro Bolt Front brake stainless steel caliper mounting bolts
Pro Bolt Front Brake disc bolts
Pro Bolt Rear brake caliper titanium mounting kit-hex slide bolt
Pro Bolt Rear brake titanium bleed nipple
Pro Bolt Rear Brake disc bolts
Pro Bolt Axil stainless steel nut, flanged 24mm
Pro Bolt Swing Arm stainless steel nut, flanged 24mm
Pro Bolt Sprocket, stainless steel nuts M10 x 1.25mm Pk 5
Pro Bolt Chain adjusters, stainless steel M8 flanged nut Pk 2
Various Stainless Steel fastenings used around the bike
Fender extender
OE lower fairings
ContiRoad Attack 2 tyres
Venture Shield to Fork Legs
Many parts have been either powder coated or sprayed with 2 pack paint to prevent corrosion of exposed parts that only have limited protective coverings from corrosion and for aesthetics. Parts such as front and rear foot pegs, rear sprocket, rear brake carrier, dog bones, various mounting brackets, oil cooler & piped and many other parts.
The M4 exhaust system is of exceptional quality and sounds fantastic.
The first service was carried out at 496 miles on 29/06/2012 by J&B Motorcycles, Boston.
The bike was set up by BSD Performance, Eye, Peterborough. Producing 74.49 Bhp and 44.41 ft-lbs at the rear rear wheel (standard SV has a claimed 71 Bhp at the crank, so is low 60's at the back wheel). She really pulls like a train (a very, very noticeable difference over a standard machine).
My SV650 and all the parts / powder coating & paint work has cost over £7000.00. I would like £5900.00 for her
There is no outstanding finance on my bike. All documents and keys are present.
If you have any questions, please feel free to ask.
Mileage: 1,859
Reg. Date: 19/05/2012
Warranty: 19 Months Remaining
Road Tax: 3 Months Remaining
I am selling my pride and joy as my partner and I have decided to save up to buy a house. This SV650 is a stunning bike, great for a blast out on twist roads or for commuting to work (60 plus miles to the gallon). She has had no expense spared on her as you will see from the list below....
M4 High Sport full system with stainless tubing and CARBON muffler
K&N Air Filter
Power Commander
Oxygen O2 Eliminator (Required to extinguish “FI” light)
Dyno Tuned by BSD Performance
Goodridge front race brake lines with stainless steel fittings
Goodridge rear brake line with stainless steel fittings
Pro BoltFront brake stainless steel bleed nipples 7mm
Pro Bolt Front brake stainless steel caliper mounting bolts
Pro Bolt Front Brake disc bolts
Pro Bolt Rear brake caliper titanium mounting kit-hex slide bolt
Pro Bolt Rear brake titanium bleed nipple
Pro Bolt Rear Brake disc bolts
Pro Bolt Axil stainless steel nut, flanged 24mm
Pro Bolt Swing Arm stainless steel nut, flanged 24mm
Pro Bolt Sprocket, stainless steel nuts M10 x 1.25mm Pk 5
Pro Bolt Chain adjusters, stainless steel M8 flanged nut Pk 2
Various Stainless Steel fastenings used around the bike
Fender extender
OE lower fairings
ContiRoad Attack 2 tyres
Venture Shield to Fork Legs
Many parts have been either powder coated or sprayed with 2 pack paint to prevent corrosion of exposed parts that only have limited protective coverings from corrosion and for aesthetics. Parts such as front and rear foot pegs, rear sprocket, rear brake carrier, dog bones, various mounting brackets, oil cooler & piped and many other parts.
The M4 exhaust system is of exceptional quality and sounds fantastic.
The first service was carried out at 496 miles on 29/06/2012 by J&B Motorcycles, Boston.
The bike was set up by BSD Performance, Eye, Peterborough. Producing 74.49 Bhp and 44.41 ft-lbs at the rear rear wheel (standard SV has a claimed 71 Bhp at the crank, so is low 60's at the back wheel). She really pulls like a train (a very, very noticeable difference over a standard machine).
My SV650 and all the parts / powder coating & paint work has cost over £7000.00. I would like £5900.00 for her
There is no outstanding finance on my bike. All documents and keys are present.
If you have any questions, please feel free to ask.