PDA

View Full Version : Brand New Aliminium Paddock stand for sale


The Idle Biker
12-01-13, 10:08 AM
I thought I'd offer this here first as you locals can probably collect and I cant be bothered with postage hassle.

I got bought this for Christmas but it's just too narrow for my Gixxer trackbike.

Here's the dimensions Minimum rear stand bobbins adaptor width (approx): 250mm
Maximum rear stand bobbins adaptor width (approx): 355mm

Link to ebay HERE (http://www.ebay.co.uk/itm/BLACK-ALUMINIUM-MOTORCYCLE-REAR-RACING-PADDOCK-STAND-/190563104536?pt=UK_Motorcycle_Parts&hash=item2c5e723718)

Its been assemble but not used. Few light scratches as I lay it on the garage floor to bolt it together.

£25 collected.

http://i1217.photobucket.com/albums/dd400/IdleBiker/Public/paddockstand_zps1b706a40.jpg

Thunderace
12-01-13, 08:19 PM
Are you sure you don't want to post it?

The Idle Biker
12-01-13, 09:00 PM
For you?????? Oh go on then. You sure it'll fit?

Tomor
12-01-13, 09:21 PM
why doesnt it fit Laurie? You got a race swingarm?

The Idle Biker
12-01-13, 10:25 PM
No Tom, it's just approx 2-3cm too narrow, even with the "hooks" moved flush to the uprights.

Tomor
12-01-13, 11:13 PM
Bend it? its Ally!

Thunderace
13-01-13, 10:38 PM
For you?????? Oh go on then. You sure it'll fit?

Can you measure the gap, and I'll pop out to the garage and measure the Ace.

Tomor
13-01-13, 10:49 PM
Can you measure the gap, and I'll pop out to the garage and measure the Ace.

Don't forget you need the bobbins Nath! (unless you already got them?)

Fallout
14-01-13, 07:25 AM
Two long bolts will do the job too.

dirtydog
14-01-13, 10:38 AM
Can you measure the gap, and I'll pop out to the garage and measure the Ace.


Here's the dimensions Minimum rear stand bobbins adaptor width (approx): 250mm
Maximum rear stand bobbins adaptor width (approx): 355mm
]


Will that do you Nath? ;)

Thunderace
14-01-13, 07:55 PM
Ah RTFP! Would fit but the boss says no!:(

The Idle Biker
25-01-13, 08:51 PM
Bend it? its Ally!

and that is what I did. Sorted. Cheers.

Wideboy
25-01-13, 10:02 PM
its a piece of **** and no one wants it

Fallout
25-01-13, 10:58 PM
And now it's a bent piece of ****.

The Idle Biker
26-01-13, 07:57 AM
Stop swearing you muppets.

DJ123
26-01-13, 08:36 AM
And now it's a bent piece of ****.

Are on about TIB or Gav? or the paddock stand?