PDA

View Full Version : Pointy clock face replacement?

Criggers
20-01-13, 12:00 AM
Just saw this on ebay. How hard do you think it'll be to fit?

http://img.tapatalk.com/d/13/01/20/ygugy6ev.jpg
joshwalker094
20-01-13, 12:35 AM
Idk, but let me know. I like it, is that just one cover?
Criggers
20-01-13, 12:36 AM
Yeah :)
MMN
20-01-13, 07:56 AM
They are pretty easy, Take the clock apart and lift the needel off with 2 spoons. http://img.tapatalk.com/d/13/01/20/yre2ajut.jpg
This is my plasma One at Night and White in the daytime.
I also changed the smd in the lower display with blue ones and under the needel a red One.
MMN
20-01-13, 07:57 AM
The tricky part is to get the needel back in the same spot.
Criggers
20-01-13, 08:45 AM
Yeah :)
jambo
20-01-13, 08:53 AM
Not done an SV, but had the clocks of my car apart last year and it wasn't too hard. As stated, the key thing is getting the needle back on in the same place. Gently turned it to the end of its anti clockwise travel then used masking tape to show where the line was.

Jambo
Bibio
21-01-13, 04:30 PM
getting needle back.. take screws out place card/paper on the face put screws back on then mark tip of needle on paper.. viola! template.