Resistor for pair removal?

[Gaz.sv650]

can anyone comfirm what resistor I need for removing the pair system ive read somwhere it us a 22ohm 5watt?
bike is a k6 650 if it makes any difference
thanks

[dkid]

Why go to the trouble of removing the whole system? You can just blank it of AFAIK? Check chewys stuff for the blanking plates. I've not heard of a resistor being needed but I've not done it myself so I could be missing something?

[Gaz.sv650]

I need to remove the whole lot as I am running out of space under the tank with the extra wires from my hid projector and I am also fitting some sv1000 throttle bodies which take up quite a bit more space so the resestor is needed to trick the ecu in to thinking its still there so it doesn't show any fualt codes

[dkid]

Ok fair do's. hopefully someone will be along who knows the answer :)

[bike_slider]

Hi fella, I build the complete race looms for supertwins. Your right with the resistor. But it needs to be cooled. I have done alot of devopment in the Sv supertwins. This is a small bit but they will get hot at high revs and burn out. If you want a resistor send me you address and I'll post you one.

[bike_slider]

Also, probly best to call as I'm flat out at the moment with the TT coming up. 07843557374

[Gaz.sv650]

Also, probly best to call as I'm flat out at the moment with the TT coming up. 07843557374
thanks mate will give you a phone in a bit

[yorkie_chris]

I wouldn't bother with SV1000 throttle bodies, TWF bores out the stock ones.

[Gaz.sv650]

I wouldn't bother with SV1000 throttle bodies, TWF bores out the stock ones.
to late and so far just has only costed me £45 for the tb and then about 100 for the remap ali think its about £250 for the bored ones