PDA

View Full Version : Pillion footrest spacer for high mount exhaust - where from?

Pricey12
20-05-13, 12:56 PM
Any idea who makes them and where i can get them from? :confused:
nikon70
20-05-13, 01:54 PM
yes, but for the life of me can i remember....
yorkie_chris
20-05-13, 02:31 PM
They are only some bits of 20mm ish bar with a hole in middle. How much offset do you need?
Pricey12
20-05-13, 02:47 PM
Good question. Don't actually have the exhaust yet to measure but I'm sure I've read somewhere the spacers are usually around 1/2", so 20mm would be about right give or take.
yorkie_chris
20-05-13, 02:55 PM
Put it on, offer the bits up and let me know what offset distance you need. Knock you some up for ooooh £12 posted? Think I've got a chunk of ally about right size.
Pricey12
20-05-13, 03:05 PM
Cheers Chris, will let you know once I have the measurement.
TheRuffellator
20-05-13, 03:47 PM
Put it on, offer the bits up and let me know what offset distance you need. Knock you some up for ooooh £12 posted? Think I've got a chunk of ally about right size.

Can't say much better than that, exactly what I've got except it didn't come from Chris :batman:
yorkie_chris
20-05-13, 03:54 PM
Think I used 40mm on my micron high level setup.
nikon70
22-05-13, 01:50 PM
will this do (http://www.ebay.co.uk/itm/2002-SV650-K2-BREAKING-AFTERMARKET-EXHAUST-CAN-MOUNTING-BRACKET-128-/321075038257?pt=UK_Motorcycle_Parts_13&hash=item4ac1904831)?

just cut off the end? grid it down a bit and should be perfect!
Pricey12
22-05-13, 01:53 PM
will this do (http://www.ebay.co.uk/itm/2002-SV650-K2-BREAKING-AFTERMARKET-EXHAUST-CAN-MOUNTING-BRACKET-128-/321075038257?pt=UK_Motorcycle_Parts_13&hash=item4ac1904831)?

just cut off the end? grid it down a bit and should be perfect!

Thanks, but having some made by Yorkie Chris :)