PDA

View Full Version : Delkevic carbon stubby for curvy

Pricey12
20-06-13, 10:24 AM
I'm selling my Delkevic carbon stubby as I'm upgrading to an Arrow full system.

It's the 225mm version so it does not have a baffle and is pretty loud, although not ear bleedingly so. I paid around £145 for this just over two months ago, so it's pretty much as new as have only done a few hundred miles since then. Still has the bulk of the manufactures warranty remaining and comes with link pipe, etc, in original box.

£100 posted.

Will put it on fleabay if no interest on here.

http://i1361.photobucket.com/albums/r680/priceyx/123_zps521056a8.jpg (http://s1361.photobucket.com/user/priceyx/media/123_zps521056a8.jpg.html)
Matt-EUC
20-06-13, 11:08 AM
I may be interested. Do they even make a baffle for that can?
Pricey12
20-06-13, 11:15 AM
I may be interested. Do they even make a baffle for that can?

I don't think they do.

That's not to say that you couldn't fit a universal one if needed. I imagine all you would need to do is drill a small hole in the end piece to bolt it in place.
Matt-EUC
20-06-13, 11:19 AM
Will do some googling.
Matt-EUC
20-06-13, 11:23 AM
Do you know how loud it is in Db? I'd like to take it on track so can't be too loud.
Pricey12
20-06-13, 11:26 AM
Not off hand, but am taking bike to have exhaust swapped over tomorrow so can take a reading with the Db app on my phone.
Matt-EUC
20-06-13, 11:35 AM
Take a reading BEFORE you change the can over please XD. At 4k revs?
Pricey12
20-06-13, 11:37 AM
Will do. Am quite interested to know myself now as never got round to testing it after downloading the app :p
Matt-EUC
20-06-13, 11:43 AM
Run outside and try it out now :)
Pricey12
20-06-13, 11:44 AM
Ha, wish I could but I'm in work and the bike is at home :(
Matt-EUC
20-06-13, 12:31 PM
No one will notice. :)
Pricey12
21-06-13, 12:38 PM
Measured it with the Db app on mg phone at 4k rpm and it was showing 79 which I have a feeling is inaccurate. Tried it several times and got the same reading :smt017
Matt-EUC
21-06-13, 12:45 PM
Can you get it to the AR? If you can ill buy it now.
Pricey12
21-06-13, 12:49 PM
Ah, bike is currently having exhaust fitted in South Wales so no can do :(
Matt-EUC
21-06-13, 12:50 PM
:(
Pricey12
21-06-13, 01:06 PM
Can post if by courier on Monday though? ;)
Matt-EUC
23-06-13, 04:32 PM
Ok. How do you want paying?
Pricey12
23-06-13, 04:34 PM
PM sent
Matt-EUC
23-06-13, 04:37 PM
Where did you send him? He has a deputy that will take over by the way.
Matt-EUC
23-06-13, 04:38 PM
But seriously, I haven't received a pm.
Pricey12
23-06-13, 05:08 PM
Hopefully I've sent it to the right place this time :rolleyes:
Pricey12
23-06-13, 05:20 PM
Sold :)
Matt-EUC
23-06-13, 06:41 PM
What diameter is the hole?
Pricey12
23-06-13, 06:44 PM
Am out and about at the mo, but will measure when I get home. Ths outlet diameter?
Matt-EUC
23-06-13, 06:44 PM
Yes for universal baffle. MOT purposes only.
Matt-EUC
23-06-13, 07:13 PM
Can you post first class or courier equivalent please? The guy helping me is going abroad in the next few days.
Pricey12
23-06-13, 07:25 PM
Will do.
Pricey12
24-06-13, 08:01 AM
Measured the diameter of the outlet and it is approximately 2.75 inches.
Pricey12
24-06-13, 12:02 PM
Gone out by next day courier this afternoon :)
Matt-EUC
25-06-13, 07:58 PM
Have received and fitted.

HOLY F*CK A DONKEY SIDEWAYS WITH A CHAINSAW IT'S LOUD!!!!
Pricey12
26-06-13, 08:00 AM
I thought that initially, but give it a day or two to get used to it an it won't seem as loud (seriously). If your coming from a standard can it will seem even louder by comparison.
Matt-EUC
26-06-13, 10:29 AM
I may get used to it but the neighbours won't.