Torx bolts to remove ignition barrel?

[rs2fifty]

I am replacing my clipons with a yoke conversion and need to get hold of the special torx like tool to undo my ignition barrel, does anyone know where i can get one or are they a suzuki only tool i have to get from them?
Thanks

[stuR]

Is it a security torx like this?
http://www.google.co.uk/imgres?imgurl=http://joecarr.files.wordpress.com/2007/11/funnyscrew.jpg&imgrefurl=http://joecarr.wordpress.com/2007/11/09/security-torx-head/&h=385&w=400&sz=92&tbnid=c3w7Q-f6-Q5XyM:&tbnh=92&tbnw=96&zoom=1&usg=__eRbgr_zEzkb3mniurIRtx8Eq8qI=&docid=yLqiOnfUMNwsiM&sa=X&ei=YkL9UfnVDqWT0AW03YGAAQ&ved=0CGsQ9QEwAw&dur=85#imgdii=c3w7Q-f6-Q5XyM%3A%3Bcb78YPBbjbXxMM%3Bc3w7Q-f6-Q5XyM%3A

Cuz if so halfords sell em. I thought with some barrels you need to grind/cut off some rivets too iirc?

[DarrenSV650S]

Pretty common things. Think it's T40 if I remember right. You can get them on ebay

[rs2fifty]

Thats what it looks like, i will try halfords first then
Cheers guys

[Bibio]

tiz a security 6 point T40. you need the hole in the middle.

[maviczap]

If not screwfix do them

[maviczap]

They will probably be a ******* to get out, as Mr Suzuki, he use a lot of thread lock on them

[Bibio]

ooohhh and turn the yoke over on the forks so the bolt is facing you then before you try and take it off put a good and hot soldering iron on the bolt for a good 5 mins to soften the threadlock.

[maviczap]

+1

[rs2fifty]

Brilliant, thanks guys