View Full Version : Breaking Blue 2001 Curvy
Sadly, I've decided that it's time to break my curvy.
The reason for it is from a main bearing giving up on the engine and i'm not likely to be able to save enough quick enough to get a replacement bike.
I'll be updating this thread with everything that i've removed from the bike as/when it's removed.
if there is anything specific that you need then let me know as i may be able to remove it sooner.
Currently my list is:
Both right and left mirrors (including supports) £25 (each)
OEM Airbox £15
Both front plastics (with panel fitted indicators) £120 (Pair)
Drivers Seat - Sold
Passenger Seat £30
Right Hand Mirror infill Plastics/fairing trim £10 (Right Only, Left has been Sold)
Drivers Seat infill panels/fairing side panel £10 (each)
Horn £10
Rear Left Fairing £25
Rear Right Fairing £25
Rear Fairing middle £10
(All 3 together £50)
Rear Brake Pedal - Sold.
Regulator/Rectifier - Sold.
Gear Leaver/Link/Footrest Hanger/Foot Rest - Sold.
I also have a belly pan that has never been painted/fitted to any bike available.
http://forums.sv650.org/picture.php?albumid=690&pictureid=4946
Cost: £50 or reasonable offers
Pictures are available on request. Everything is advertised elsewhere as well so don't be surprised if they go quick.
Collection is recommended as i'd rather not trust royal mail to not loose/break something but postage can be an option.
Collis
id be intrested in front an rear spark leads inc selonoids & boots and a right front disc maby both if price is right probably moor once i go over the bike abit
RobbieSV
19-09-13, 09:23 AM
Hi,
How much for the speedo sensor?
Thanks
rp16v and RobbieSV i'll put your name against those parts if you want.
Everything else is still available jsut let me know if there is anything you are after that I may not have posted up yet.
I'm also going to add that I do have a color coded hugger/chain guard.
Although it has some cracks in and would need minor repairs.
If anyone is interested let me know.
RobbieSV
24-09-13, 02:35 PM
rp16v and RobbieSV i'll put your name against those parts if you want.
Everything else is still available jsut let me know if there is anything you are after that I may not have posted up yet.
Thanks, do you have a price?
Call it £25 if you want, although currently it's a little too well attached to the bike and I need to keep it in a rolling mode for the moment untill i have removed enough of the parts.
On the bike makes part storage easier and less chances of loosing bits too.
RobbieSV
24-09-13, 11:27 PM
Ok I'll take it please.
Ok I'll take it please.
ok then, I'll let you know once ive got it off the bike, a few other people are asking for parts from the front end as well so may remove it over the weekend - depending on weather.
ClunkintheUK
25-09-13, 08:43 AM
Any chance of just the front indicators?
Any chance of just the front indicators?
unfortunately not, I smacked both mine on the front door getting it into the house a few times and they both snapped, I replaced them with panel mounted indiactors which if i removed from the fairing pannels would make them look ugly
NeilStevens
28-09-13, 04:05 PM
Left hanger, gear lever and rod available?
littleoldman2
28-09-13, 06:11 PM
Forks?.
millemille
29-09-13, 10:02 AM
I'd be interested in a price on the following:
Air box lid
Front cylinder exhaust header
Radiator fan switch
Idle speed adjuster mount
R/H side coolant hose
Fuel hoses and clamps from tap to pump and pump to carbs
Vacuum hoses and clamps from tank to tap and inlet stub to pump
Regulator/Rectifier
Front cylinder coil complete
Horn
hi
what condition is the main seat in? any nicks or tears in the covering?
Left hanger, gear lever and rod available?
Yes indeed they are available. I know too well the problems from a broken hangar.
Forks?.
this can be arranged although mine are mostly stock with preload adjusters but in excellent condition.
I'd be interested in a price on the following:
Air box lid
Front cylinder exhaust header
Radiator fan switch
Idle speed adjuster mount
R/H side coolant hose
Fuel hoses and clamps from tap to pump and pump to carbs
Vacuum hoses and clamps from tank to tap and inlet stub to pump
Regulator/Rectifier
Front cylinder coil complete
Horn
reg/rec has already been taken sorry. Otherwise you want pretty much all the hoses?
hi
what condition is the main seat in? any nicks or tears in the covering?
sent from a device, somewhere, not on a bike
hi
what condition is the main seat in? any nicks or tears in the covering?
The seat is in perfect condition, no marks or anything, except maybe for a bum print caused by a rather hairy near miss with a dumb/blind jeep driver. I can send a picture if you want
sent from a device, somewhere, not on a bike
Roberrrrt
30-09-13, 05:22 PM
Pillion seat?
Yep still available. Price is on the first page and is in perfect condition
sent from a device, somewhere, not on a bike
millemille
30-09-13, 06:11 PM
reg/rec has already been taken sorry. Otherwise you want pretty much all the hoses?
I want everything that's on the list I posted....
The seat is in perfect condition, no marks or anything, except maybe for a bum print caused by a rather hairy near miss with a dumb/blind jeep driver. I can send a picture if you want
sent from a device, somewhere, not on a bike
excellent - i'll take that off your hands then. pm about to be sent.
RobbieSV
01-10-13, 11:00 AM
ok then, I'll let you know once ive got it off the bike, a few other people are asking for parts from the front end as well so may remove it over the weekend - depending on weather.
Hi,
Have you removed the speedo sensor yet?
Not as yet, ill get ontobthwtbover the weekend hopefully
sent from a device, somewhere, not on a bike
Do you have a coil going ?
ejsv650s
04-10-13, 09:13 AM
still got the rear hugger/ chain guard? what colour is it in?
I do indeed still have the hugger, it will need some repairs though before being fully useable.
It is color matched to my bike - Grand Candy Blue
If you want i can send some pictures accross.
Stooks,
Yes I do have both coils, they are all working fine - just not removed them yet.
Shamless bump.
Still plenty of the bike left... infact most of it is left
drnorman91
27-10-13, 02:13 PM
How much for the ECU/CDI?
Spikey12
28-10-13, 06:32 PM
how much for your clocks if you still have them?
Still got the clocks, ill drop you a pm
sent using the force...
Please could I have a posted price for -
rear brake pedal
right clip-on inc. bar end and locating bolt
rear brake disc
one front mudguard bracket inc. the two bolts
Thanks
Please could I have a posted price for -
rear brake pedal
right clip-on inc. bar end and locating bolt
rear brake disc
one front mudguard bracket inc. the two bolts
Thanks
Sorry, the rear brake pedal has been sold already
sent using the force...
No worries. Do you have the other bits?
No worries. Do you have the other bits?
Indeed, ill drop you a pm
sent using the force...
RobbieSV
07-11-13, 10:24 AM
Hi I'm still after the speedo sensor, Is it off the bike yet?
Rob
Robiesv you have a pm. Full dismantle is happening today so if there is anything your after let me know
sent using the force...
fchat63
09-11-13, 11:54 PM
Hi,
How much for the rear light assembly and the small clip on the top of the front mudguard if you have them.
Thanks.
Hi,
How much for the rear light assembly and the small clip on the top of the front mudguard if you have them.
Thanks.
Brake light has been sold sorry. Which clip are you reffering to exactly?
sent using the force...
For anyone thats interested, the brake lines are all braded as well
sent using the force...
Black-SV
10-11-13, 09:50 AM
Hi, is the undertray available? could you send me a posted price?
Thanks
fchat63
10-11-13, 06:54 PM
Hi,
Shame about the light, fleabay here I come.
There's a small hole in the top of my mudguard where the brake hose goes across to the left caliper and I'm assuming it should have a retaining clip of some sort, not to worry but worth asking.
thanks.
I have the same hole, but the cables run down each fork leg for me
sent using the force...
Hi, is the undertray available? could you send me a posted price?
Thanks
Undertray is still available, ill drop you a pm about price
sent using the force...
Shameless Bump...
If anyone is thinking of fitting an aftermarket can and doesnt want the hassle of cutting the pipes, Mine are pre-cut
Recycling thread as im still braking the bike, i have the engine to drop out and to pull apart the front end to make it no-longer roll but everything else is good to go
sent using the force...
HarrisBikeNut
06-04-14, 04:02 PM
Do the brake lines have stainless fittings and banjo bolts? If so price please?
Regards
Bob
Yes and yes. They are also still attached to the calipers and resivoirs and still have brake fluid in the system at the moment
sent using the force...
Hi there.
Im after a Fuel tank and front mud guard. Condition, price and your location please :)
Hi All,
Appologies for this taking so long and not getting back to some of you, i've been busy with work and home life as well as stripping down the bike.
I now have practically everything stripped down and ready to sell just let me know what you might be interested in and ill let you know if it's still available.
Yes i still have the brake lines and they are with the banjos all ready to fit.
fchat63
05-09-14, 09:57 PM
Hi fella,
Front/rear calipers and carbs.
Cheers.
Franco
VBRYANT
06-09-14, 07:22 AM
How much for all the braided brake lines and front farings ?
How much for all the braided brake lines and front farings ?
All 3 parts or left and right only?
Sent from my LG-D855 using Tapatalk 4
Hi fella,
Front/rear calipers and carbs.
Cheers.
Franco
You have a pm
Sent from my LG-D855 using Tapatalk 4
VBRYANT
06-09-14, 12:32 PM
All 3 parts mate
VBRYANT
06-09-14, 12:33 PM
Sorry left and right
Sorry left and right
So not the middle nose cone part?
Sent from my LG-D855 using Tapatalk 4
VBRYANT
06-09-14, 12:34 PM
Nope just the sides I only need the left one
Is the ignition barrel and key available?
Is the ignition barrel and key available?
Yes it is still available. Will pm you
sent from a galaxy far far away (from a bike)
Thanks for pm buddy, how much for the ignition and keys posted please?
Running out of time before my track day to get the bike sorted!
Shameless bump
sent from a galaxy far far away (from a bike)
dannywride
11-09-14, 08:01 PM
What's left?
Sent from my GT-I8160 using Tapatalk 2
Plenty. Say what your looking for and ill let you know if i have it still (most likely i do)
sent from a galaxy far far away (from a bike)
Cunliffe87
11-09-14, 09:09 PM
Hi, do you have front and rear wheel complete with disks? If so how much thanks
dannywride
12-09-14, 08:44 AM
Did you sell rear caliper and hugger ?
Sent from my GT-I8160 using Tapatalk 2
Yarders91
12-09-14, 09:54 AM
Do you still have the forks? Are they in good nick?
ManMango
14-09-14, 04:44 PM
Do you have the rear brake pedal high adjustment piece that connects the actual pedal arm or did this go with the rear set?
Here is my stuff wanted post
http://forums.sv650.org/showthread.php?t=213307
Do you have the rear brake pedal high adjustment piece that connects the actual pedal arm or did this go with the rear set?
Here is my stuff wanted post
http://forums.sv650.org/showthread.php?t=213307
I think i do, will check and pm you.
sent from a galaxy far far away (from a bike)
lovella
15-09-14, 09:01 PM
Hi,
Do you still have the petrol tank available?
Thanks
TPPhotography
16-09-14, 05:12 PM
Do you have the rear brake stay that the calliper bolts onto that the rear spindle goes through not the link pipe itself. If so how much posted?
Kind Regards
vBulletin® , Copyright ©2000-2025, Jelsoft Enterprises Ltd.