GSXR mirror mods

[sv650kent]

Just finished my GSXR mirror mods and i have to say vison is miles better then the stock mirriors.
https://www.dropbox.com/s/u8rkmcqfv50lrks/IMAG0017_BURST002.jpg

sorry for the photo it wont upload on here.

https://www.dropbox.com/s/u8rkmcqfv50lrks/IMAG0017_BURST002.jpg

[DanSp]

Wrapped in black elect tape??

[sv650kent]

Only at the moment to hide the cable's, until I figure out a nice way of concealing them

[DanSp]

so are they the standard SV stalks with GSXR mirror/indicators?

[sv650kent]

Yes, standard stalks with the gsxr heads. Just need to figure out a way of cleaning them up.

[DanSp]

Have often thought of using the GSXR Mirror/indicator combo but never botheredto look into it... i assume the whole assembly from the GSXR doesnt simply bolt on, or can not adapt the SV to fit?

[sv650kent]

They will not fit directly without an adapter, a guy on here sells them from Germany however there crazy expensive. See link for adaptors
(http://www.sv-portal.com/forums/showthread.php?t=38439)

here is the link for what I did, thanks to this guy it only took a hour to rehouse them wire and install them.
http://www.svrider.com/forum/showthread.php?p=1590539

[sv650kent]

Here is link for adapter
http://www.sv-portal.com/forums/showthread.php?t=38439

[DarrenSV650S]

They will not fit directly without an adapter

They do, you just have to file part of the gixxer arm to allow them to rotate a bit. Looks a lot better with the matching gixxer arm, and means you can hide the wires.

[sv650kent]

But on the gsxr arm the screws are built-in and it would point to the floor this what the adapter was for

[DarrenSV650S]

Yeh you also need to get a base mount from a gsxr K4 mirror. Forgot about that part