Euro to flat beam headlight mod. Curvy

[Dabteacake]

Took my curvy apart last night to mod my euro spec headlight.

Have no pictures but now have flat beam from my projector instead of a left hand flick

:)

[squirrel_hunter]

And how did you do it?

[Dabteacake]

I was thinking of taking pics but the kids where under the feet.

Heated the light in the oven for 3 mins at gas mark 2

Pried it open with a large flat screwdriver

Unscrewed the 2 Phillips screws holding on a pivot point

Unscrewed the adjustment screws to release the projector

The lightbulb housing is held on by the casting version of plug welding. I filed this down the pried it off with a small flat headed screwdriver

I used some aluminium can to make the blanking plate. I drilled through that and the casting with a 3mm metal bit.

That was screwed in place with a screw.

To reattach the reflector I drilled it out to 3mm and then used screws to hold it in. I then tested the light on the bike and got a flat beam just need to see if it passes an MOT