CAhmroiss
07-01-14, 08:11 PM
For sale (as spares or repairs) is my SV650S L1 2011 in Pearl Nebular Black.
THIS IS NOW ON EBAY: CLICKY (http://www.ebay.co.uk/itm/301063593131?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649)
Bike has been stripped of all it's plastics but I still have all of these which will be included.
A few things are missing from the bike but no major parts, such as seat, throttle tube, brake lever, master cylinder
Frame, Loom, Forks, Engine, Bars and Wheels are still as one so bike is rolling
Frame (V5 is present)
Forks
Wiring loom
Clocks with GENUINE 11,731 miles
Bars
Airbox
Wheels (fairly new powder coated red with 2 new Michelin Pilot Power 2CT) All discs and renthal sprocket attached
Engine (non runner has a hole in the engine casing and the starter motor is hanging off due to damage)
Rear light and headlight
Tinted headlight covers
Aftermarket clear rear light with built in indicators
Full original uncut exhaust (not attached to the bike)
Damaged Zero Gravity double bubble screen (small corner piece is missing)
FI International 33bhp restrictor (throttle stop and washers)
Original clear screen
Pillion pegs
Plastic seat infills
Motografix white graphics set
R&G tail tidy
Full power ECU
Toolkit
Rear brake caliper, pads, hoses and master cylinder
Front brake calipers, pads and hoses
This is how the bike looked before I started to strip it down
http://i.imgur.com/mAp8lEHl.jpg
THIS IS NOW ON EBAY: CLICKY (http://www.ebay.co.uk/itm/301063593131?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649)
Bike has been stripped of all it's plastics but I still have all of these which will be included.
A few things are missing from the bike but no major parts, such as seat, throttle tube, brake lever, master cylinder
Frame, Loom, Forks, Engine, Bars and Wheels are still as one so bike is rolling
Frame (V5 is present)
Forks
Wiring loom
Clocks with GENUINE 11,731 miles
Bars
Airbox
Wheels (fairly new powder coated red with 2 new Michelin Pilot Power 2CT) All discs and renthal sprocket attached
Engine (non runner has a hole in the engine casing and the starter motor is hanging off due to damage)
Rear light and headlight
Tinted headlight covers
Aftermarket clear rear light with built in indicators
Full original uncut exhaust (not attached to the bike)
Damaged Zero Gravity double bubble screen (small corner piece is missing)
FI International 33bhp restrictor (throttle stop and washers)
Original clear screen
Pillion pegs
Plastic seat infills
Motografix white graphics set
R&G tail tidy
Full power ECU
Toolkit
Rear brake caliper, pads, hoses and master cylinder
Front brake calipers, pads and hoses
This is how the bike looked before I started to strip it down
http://i.imgur.com/mAp8lEHl.jpg