View Full Version : Pointy and curvy bits
All prices are + postage
Pointy rear brake caliper, mounting plate with nearly new pads £30
http://img59.imageshack.us/img59/3953/image4af.jpg
Pointy rear shock, looks like it's had some corrosion but it's been treated and works well. £25
Curvy toolkit £10
Curvy seat cowl genuine suzuki, originally silver now In primer £26
Curvy infill panels - £15
Full set of curvy cams £60 delivered
Curvy hugger £26
regulator rectifier for a curvy £26
carbs -sold
curvy forks (later ones with preload adjust) - sold
set of curvy yokes -sold
Curvy grab rail £15
rear disc curvy - £20
I've got a spare curvy to break .If you need anything off it let me know and I'll get some photos and a price to you.
Chris
What fairings do you have, condition and price?
NeilStevens
19-01-14, 08:34 PM
Hi
really random, but do you have the "rubber" pipe that goes from handlebar brake fluid reservoir to the main brake lines. Its only about 10 cm of tubing and it only seems to be sold in metre lengths. (in a tumble, my broken windscreen sliced through mine)
Neil
I'll have a look at what I've got. I'm pretty sure I'll have a length of hose in my workshop will be suitable.. Got a bit which goes from rear m/c to reservoir I think so will cut a bit down for you if you want?
What fairings do you have, condition and price?
No plastics apart from curvy rear hugger
NeilStevens
20-01-14, 08:51 AM
I'll have a look at what I've got. I'm pretty sure I'll have a length of hose in my workshop will be suitable.. Got a bit which goes from rear m/c to reservoir I think so will cut a bit down for you if you want?
That would be helpful but have have found someone selling short lengths on ebay for a fiver if that is less hassle all round.
ClunkintheUK
20-01-14, 08:30 PM
What colour is the hugger? And how much you after? I can pick it up rather than post too.
Dabteacake
21-01-14, 06:01 PM
2nd dibs on the huger can you put up a pic and a price including postage
Thanks
Hi, yeah sorry I'll put a photo up when I next get in the workshop, should be thurs. I'll put the price up once I've given it a proper look over.
Chris
garynortheast
22-01-14, 09:21 PM
Front discs, condition and price if they are available please?
Discs are gone I'm afraid
garynortheast
23-01-14, 10:35 PM
OK, thanks.
BikeTransporter
25-01-14, 06:15 PM
Hi do you have a 3 wire fuel pump? ? ?
SharkyRider
26-01-14, 07:11 PM
I'm after standard short curvy mirrors with intact glass and rubber covers, you got these?
ejsv650s
26-01-14, 07:34 PM
Hey,
Do you have the front right indicator with mounting screws?
Also, do you still have the tool kit?
Cheers!
Sorry this has taken so long! been super busy
Hi do you have a 3 wire fuel pump? ? ?
afraid not
I'm after standard short curvy mirrors with intact glass and rubber covers, you got these?
no sorry mate
Hey,
Do you have the front right indicator with mounting screws?
Also, do you still have the tool kit?
Cheers!
ill double check the indicator on saturday mate, still have the toolkit
This is the hugger, i believe it to be a genuine suzuki
a bit cracked at the front mounthole but i didnt notice it till i got down to remove it. Also a couple tiny cracks in 2 other mounting holes.
http://imageshack.com/a/img600/5372/m4gx.jpg
http://imageshack.com/a/img534/6100/bqye.jpg
http://imageshack.com/a/img691/3080/h5ci.jpg
http://imageshack.com/a/img845/7559/5egi.jpg
Dabteacake
31-01-14, 12:09 PM
How much for the hugger? Can you include postage in the price?
ChrisCurvyS
31-01-14, 03:21 PM
What condition are the curvy forks in please?
SharkyRider
31-01-14, 06:30 PM
Tank and forks?
I have a tank that's a bit damaged, I can post some photos if you'd like.
Forks - see below.
What condition are the curvy forks in please?
Mechanically Forks are straight and functioning. No leaky seals. Cosmetically, they're not perfect I can put some photos up tomorrow if you want.
SharkyRider
01-02-14, 05:05 PM
Need an undamaged tank :(
the forks are from a Sv650S not N, right? if so would you consider just selling the lowers?
Do you have a set of standard curvy indicators, stock exhaust and front rider seat?
Need an undamaged tank :(
the forks are from a Sv650S not N, right? if so would you consider just selling the lowers?
Do you have a set of standard curvy indicators, stock exhaust and front rider seat?
Yep forks are from an S but will be selling them whole.
I have a stock exhaust. Do you need just the can or the entire system?
Need to check for the indicators mate.
Thanks
Chris
SharkyRider
02-02-14, 09:37 AM
How much on the stock exhaust just the can aslongs it's not been cut :)
Get back to me on the indicators
front rider seat?
Cheers AJ
Yep have the front riders seat,
I'm going to go and check condition of seat and exhaust in a minute, do You want me to send you some photos?
The exhaust can I have hasn't been separated from the headers but I can sort that if you want it.
I have only one of the indicators left. The rear right, not sure if it's much good to you, but I'll throw it in if you want the exhaust.
The seat I have has a little damage on the front edges and a couple of cracks in the vinyl from age.
I'll get the photos up in a second. The exhaust can I have is in good used condition, id have to check postage for you for a delivered price.
What colour is the seat cowl?
What colour is the seat cowl?
its in primer ready to paint.
chris
mase_tw
03-02-14, 06:33 PM
How much for the set of wheels mate?
How much for the set of wheels mate?
Replied to you on fb mate.
Bump, original post updated
Crashed my curvy on Friday ):
I need all the levers: gear, rear & front brake, clutch. Also the right set of indicators (I know you don't have the front, but what about the rear? That still about?)
SW London if that makes a difference to the cost. I would be happy to collect, but my SV don't change out of 1st gear...
Cheers mate
Crashed my curvy on Friday ):
I need all the levers: gear, rear & front brake, clutch. Also the right set of indicators (I know you don't have the front, but what about the rear? That still about?)
SW London if that makes a difference to the cost. I would be happy to collect, but my SV don't change out of 1st gear...
Cheers mate
Hi mate, sorry to hear about the fall, hope you're ok.
I've got the rear right indicator and I believe the foot controls. Did you want the entire Footrest assembly or just the actual lever itself?
I'll have to see which hand levers I have for you.
Chris
Hi mate, sorry to hear about the fall, hope you're ok.
I've got the rear right indicator and I believe the foot controls. Did you want the entire Footrest assembly or just the actual lever itself?
I'll have to see which hand levers I have for you.
Chris
I'm doing alright. Can't wait to be good enough to hop back on the bike! Every sunny day is torture.
Just the levers are what I need. Luckily it was at slow enough speed to not do much damage beyond snapping the ends off things. Hand levers are a bit less of a problem as the aftermarket covers this pretty well, though if you've got 'em and they're going cheap I'll take 'em.
-
Conor
No worries. Ill have a look for you in the morning when I get in the garage mate.
Chris
Reg rec Provisionally sold mate.
vBulletin® , Copyright ©2000-2025, Jelsoft Enterprises Ltd.