Log in

View Full Version : Seat Cowl, infills, R&G crash bungs & Scorpian Can for Pointy


SIII
25-01-14, 06:14 PM
Following the change of bike to a K7 GSXR750, I have the following parts to sell.

R&G crash frame & bungs - fitted on K9 fully faired. Frame and bolts all included and these are in excellent condition - no corrosion as greased and ACF50 from fitting. The bungs are not R&G but chewys and one has a scuff on it from when I dropped the bike following my stoppie incident. Only inch long by 1/2 wide on one edge, been using for last 2 years since it happened.
£50 plus postage. SOLD


Nebular black seat cowl -excellent condition -no scratches, if you hold to the light there are some swirl marks but not many or bad, can't see when on the bike.
£50 inc P&P SOLD


Infill pieces and frame - fills in the bits where the grab rail goes when you fit the cowl - no scratches. (rockin horse poop-even worth getting if yer bikes not black). There is a little blackening of the metal, as can be seen. There is also rub marks on the back, where it meets the seat fairing, but you can't see when fitted.
£30 inc P&P

Or I'll do the pair for £75.00 SOLD


Alloy Scorpion can & link pipe. Looks good, and sounds awesome, best i have heard, even bibs agree's one of the nicest sounding. Has a wee scuff (see previous incident) as can be seen on picture and scuff on the back where the strap goes. All bright and clean on the front / top that can be seen. Will include clamps but could do with new one's as they aren't that tidy
£40 plus postage SOLD

Dibs on here first but not yours till you pay in a timely fashion. Paypal best.




https://scontent-a-lhr.xx.fbcdn.net/hphotos-prn1/t1/1069817_589527921128748_921623013_n.jpg

https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-ash3/999238_589539844460889_3948882_n.jpg

clarke135
25-01-14, 06:55 PM
dibs on r&g crash bungs

Dmilsey
27-01-14, 06:17 PM
Hi mate, is the exhaust road legal?

SIII
27-01-14, 06:43 PM
No, but I have never been stopped or had anything said, even at Police Bike Safe course. Was always going to buy a DB killer, but never got stopped - so never bothered. Once you hear it - you won't want one either. No offensively loud. but does sound sooooo nice.

Put my std can back on to trade in. What a pathetic noise and looked awful compared. can put picture up with can on the bike if you want

SIII
27-01-14, 06:54 PM
https://lh6.googleusercontent.com/-BBcpJoCUJ4k/UuaqM7A2E-I/AAAAAAAACZk/iiOybpJNDbs/w676-h507-no/P1010252.JPG

SIII
28-01-14, 07:00 PM
190 Views & 1 sale !!!! :smt107

Come on guy's, I need money to buy shiney bits for my Gixxer !!!:smt022

Dmilsey
28-01-14, 07:11 PM
i'd have the exhaust if it was e marked :(

Tomor
28-01-14, 08:38 PM
Why you need it e marked? Just need it not to say 'not for road use' I had one of those scorpions and they sounded awesome! Still got it but is scratched.

sm650n
28-01-14, 08:45 PM
Whats the lowest you would go on the seat cowl and infills

SIII
28-01-14, 11:01 PM
PM'd

Kenzie
29-01-14, 07:43 AM
Could you also let me know on the seat cowl? Don't need the infill.

DryRob
29-01-14, 11:23 AM
How much would the can be posted?

SIII
29-01-14, 11:51 AM
Do you the can for £50 posted? probably cost me more than £10 postage, due to size & weight, but i'll take that.

DryRob
29-01-14, 12:42 PM
Is there anywhere to connect a baffle or would I have to drill it?

sm650n
29-01-14, 12:52 PM
PM'd you back thanks.

SIII
29-01-14, 12:53 PM
yeah it would need drilling to fit a baffle. But why would you want to ??? Sounds absolutely brillianr, honest. And it ain't that loud.

DryRob
29-01-14, 12:55 PM
It's only for if/when I take it to a track with a db limit. I'll take it anyway. Am I going to have to cut the original system up?

SIII
29-01-14, 01:05 PM
yeah you have to cut 50mm above the weld, IIRC. PM'd you.

SIII
30-01-14, 03:17 PM
Cowl & Infills still available, Free P&P for the pair.

SIII
03-02-14, 10:10 AM
Need the cash for shiney bits, so I'll do the cowl & infills for £75.00

DryRob
03-02-14, 10:39 PM
I got the can through today cheers, looking forward to fitting it at weekend. Cheers

SIII
04-02-14, 02:29 PM
Glad your happy with it.:cool:

SRT2KEN
05-02-14, 09:00 AM
would you send the cowl and infills to the USA? my zip is 95628 if you need shipping quote. thank you

SIII
05-02-14, 11:49 AM
PM'd

disco
24-02-14, 11:41 PM
Hi Im not really sure if both bits are needed of the seat cowl what is the metal item?

SIII
25-02-14, 07:31 PM
The metal part is the two infill panels that fill the gap when you remove the grab rail. You don't 'need' it but otherwise there will be gaps left or you have to leave the grab rail on.

Will sell seperately.

SIII
07-03-14, 09:01 AM
Cowl & Infills still for sale.

PM me an offer !

SIII
08-03-14, 07:47 PM
ALL SOLD:smt003