Log in

View Full Version : Sv650 Clear out.

Elliott
08-09-14, 05:55 PM
Link (http://www.ebay.co.uk/sch/elliottwoodruff/m.html?item=281434587511&ssPageName=STRK%3AMESELX%3AIT&rt=nc&_trksid=p2047675.l2562)

http://thumbs4.ebaystatic.com/d/l225/pict/281434587511_1.jpg SV650 forks K3 2003-2010 - progressive £100.00 + £10.00 postage

http://thumbs1.ebaystatic.com/d/l225/m/m0TsmAIY9s-crlYIOAvthoA.jpg SV650 forks 98-2002 - £40.00 + £10.00 postage

http://thumbs1.ebaystatic.com/d/l225/m/msGKV6BQ4lYYa0Wadgs1FTA.jpg Viper Stainless Slip-on - £40.00+ £10.00 postage

http://thumbs1.ebaystatic.com/d/l225/m/mbe_Z7Y16qKNUIQ4cK1a5fQ.jpg Sv650 (s) Throttle Bodies - £40.00 + £6.00 postage

http://thumbs4.ebaystatic.com/d/l225/m/mvoW6BOJ3TIBKPVCpEAL4TQ.jpg Sv650 s progressive springs - £30.00 + £6.00 postage

Also have (all K3)
airbox - £15 + postage
Rear caliper + bracket - £20 + postage
reg/rec £20 + postage
LH caliper - £5 + postage
ManMango
08-09-14, 07:40 PM
Hi pal, Ill probs take the progressive springs off your hands if they would be suitable for me.

I was going to buy some Ktech springs 9.0-9.5n

Progressive are not set to weight are they but give a lot stiffer feel though? I'm about 15st so wasnt sure if progressive would be enough for me.
Surfjayce
08-09-14, 07:46 PM
Id be interested in the forks at the top if they will fit my SK5, also as long as the chrome work on the tubes is completely un pitted
Elliott
09-09-14, 06:27 AM
Hi pal, Ill probs take the progressive springs off your hands if they would be suitable for me.

I was going to buy some Ktech springs 9.0-9.5n

Progressive are not set to weight are they but give a lot stiffer feel though? I'm about 15st so wasnt sure if progressive would be enough for me.


Should be fine pal. Progressive gives the same 'plush' feeling when riding slow through towns etc and the more grouped coils near the bottom give a harder feel to avoid excessive dive when "pushing on".

Id be interested in the forks at the top if they will fit my SK5, also as long as the chrome work on the tubes is completely un pitted


They will fit and not pitted however grubby where the lower and upper triple clamp on.

If you pair do want the above please pm me your PayPal emails + address and I'll send you an invoice.

Going to go back into the garage later to see what else I manage to find!


Sent from my iPhone using Tapatalk
Elliott
10-09-14, 06:47 AM
Gen1 forks sold.


Sent from my iPhone using Tapatalk
Grinch
10-09-14, 03:54 PM
What did the exhaust fit? As I'm looking for one for my curvy.
Elliott
10-09-14, 05:17 PM
What did the exhaust fit? As I'm looking for one for my curvy.

Off my pointy

believe its 51mm but someone else may know better
steady2wheels
10-09-14, 05:24 PM
do you have curvy bodywork?
Elliott
11-09-14, 06:33 AM
do you have curvy bodywork?

Sorry pal but no
Grinch
11-09-14, 10:53 AM
Off my pointy

believe its 51mm but someone else may know better

I'll check my measurements when I get home and see if it will fit.
Grinch
12-09-14, 10:35 AM
Sorry I forgot all about this, will check tonight.
andrewsmith
12-09-14, 04:14 PM
It should fit Curvy is around 52mm
Elliott
12-09-14, 05:51 PM
actually just found this image

http://i.ebayimg.com/00/s/NTcyWDYwMA==/z/f6YAAOxycmBS64DT/$_12.JPG

So will work!
Grinch
12-09-14, 06:44 PM
In that case I'd like it, paypal okay?
Elliott
13-09-14, 06:55 PM
In that case I'd like it, paypal okay?

Yup

Will PM you :)

99-02 forks sold :)
Elliott
15-09-14, 06:18 AM
Viper exhaust sold :)


Sent from my iPhone using Tapatalk
Elliott
16-09-14, 11:09 AM
K3 forks sold

Any want the springs or the Throttle bodies?
Ste-veo
07-10-14, 09:52 PM
Whats the condition of the rear caliper and bracket like?
aesmith
13-10-14, 03:21 PM
Any want the springs or the Throttle bodies?
Are the springs for Curvy or Pointy?