SV1000 Allmost all parts available

[sniff]

After finding out the big end bearings have gone on the 1000 its time to strip the K4 for all the parts.

Engine, as said big end bearings have gone and makes a noise. Have video of the engine running £175 prefer this to be collected from Maidstone.

REAR WHEEL £125
Front wheel plus discs £100
Front callipers stripped and rebuilt £75
Rear calliper again stripped and rebuilt £40
Rear full fairings inc light £65
Rear seat not perfect £20
Front seat good nick £30
Tank inc pump £100
Forks good condition dust seals not perfect £100
Rear swing arm £35
switch gear both left and right £40
indicators rear only £25 inc tail tidy
Rear fairings inc rear brake light £60
Riders seat £30
rear undertray £15
starter £25
Horn £5
Rear brake master cylinder and brake hose £20
rear sets £40 Pos sold

Please remember that the WHOLE bike is be broken so if there is anything you need let me know. All electrics, body work, rear sets, grab handle, and a few other bits.

Ask and I might just have it all still. Will update as and when stuff gets sold or someone asks for something.

updated 07.01.15

[sniff]

Not many 1000 owners in here then? Or there are just no one has crashed theirs over the last few months.

[Ratty]

You will have more interest here. (http://www.sv-portal.com/)

What mileage has the bike / engine done ?
How did the bearings get lunched ? Was it no oil ?
What colour is the bodywork ?
What tyres are on the wheels and how much life left in them ?
I may know somebody interested in the front calipers. I'm seeing him tomorrow night.
Dave Preston might be interested in the engine / bike.

Ratty

[sniff]

Its this one.

Sorry does help giving the colour at times!

http://i1227.photobucket.com/albums/ee425/davieboy106/TOY3_zps57bcb951.jpg

[sniff]

Engine done around 80,000 and looks like it wasn't looked after very well. The oil was more like sludge but has had a good clean out and fresh oil and filter added.

[Ratty]

I don't think there is much I could use from that , but I will ask my mate about the calipers tonight.

How new are the front discs ? Are they shop new or just new to the bike ?

Alan

[sniff]

shop new. done zero miles. fitted then found out about the engine after. would have been better to do the engine first then find out about the noise from engine.

[650]

Hi mate, sorry for not getting back to you about those parts I enquired about, turns out I only need the following:


Handlebars (literally just the bars) and that little clip that holds the lower engine fairing on, left hand side:


http://i717.photobucket.com/albums/ww173/chickenpot/Untitled_zpsecf99819.png (http://s717.photobucket.com/user/chickenpot/media/Untitled_zpsecf99819.png.html)


Maaaaaaybe the mirrors if they're cheap enough!


Let me know prices

[sniff]

bars now gone, sorry. I'm sure we can sort out a price for the mirrors. The lower fixing I'll find out about. As not sure if the belly pan has sold already.

[650]

No worries, let me know

[curlylee]

i will take the clocks and surround if still for sale

[asteer17]

Hi, do you have the front left hand break caliper? And pillion seat?

Cheers

[curlylee]

pm sent

[sniff]

Hi, do you have the front left hand break caliper? And pillion seat?

Cheers

I've got both callipers. see prices on the first post. Rather sell as a pair or I'll end up with one left over and won't be able to sell it :(

[sniff]

i will take the clocks and surround if still for sale

Sorry clocks now sold

[TimTucker]

Are the side panels -- they dark gray bits of plastic directly under the seat -- and their fixing bolts available at all? http://forums.sv650.org/showthread.php?t=215042

I have a 650 K4, so yours would fit.

[scnieds]

Do you still have the exhaust and are they stock suzuki cans

[sniff]

sorry cans sold but I do have the side panels and bolts for these too.

[TimTucker]

That's great. How much would you be asking for them?

[suzuki_ben]

Pm'd

[suzuki_ben]

Needing rear foot pegs and a good condition headlight if you can help.

[EssexDave]

PMed about Indicators, clutch lever & reservoir & RHS bar end

[sniff]

PM'd those back with info.

[josefine666]

Hey, Do you still have the forks? (I only really need the right but not sure if you had stripped them or were still in the yolks)

[asteer17]

Hi, do u still have both calipers? Also do you have the down pipes ?

Cheers