PhilSV
10-06-15, 12:33 PM
This is from a 2000 SV650Y.
Not very pretty, but I havent cleaned them up at all. The calipers have been stripped and everything split okay, slight pit marks on the pistons and will need new seals and a new pin for each, and of course pads.
Front wheel had this note on its last mot : Front Wheel damaged but not significantly reducing the original strength (4.2.1a) and if it were mine I would use new bearings and new discs.
No top yoke, no pinch bolts on the lower fork legs.
The fork dust seals need replacing.
It is what it is, needs stripping cleaning and some new parts chucking at it.
£100 +postage If you want close ups pm me your e mail
Not very pretty, but I havent cleaned them up at all. The calipers have been stripped and everything split okay, slight pit marks on the pistons and will need new seals and a new pin for each, and of course pads.
Front wheel had this note on its last mot : Front Wheel damaged but not significantly reducing the original strength (4.2.1a) and if it were mine I would use new bearings and new discs.
No top yoke, no pinch bolts on the lower fork legs.
The fork dust seals need replacing.
It is what it is, needs stripping cleaning and some new parts chucking at it.
£100 +postage If you want close ups pm me your e mail