Pointy "S" clearout

[Geordie Mick]

No longer got either of my SVs and need some storage space for other, erm, projects. So I have (pics on request by PM or email):

OEM screen - from sk6 - very good condition: £10 posted

Front Fairing "chin piece"/skirt thing - few light scrapes: £10 posted

Clutch perch - no switch, but good condition: £5 posted

Front sub loom - very good: £5 posted

Radiator end covers - very good: £5 posted

Front axle - good: £5 posted

Lower yoke/stem - some surface rust and top nuts have seen better days: £10 posted

Rear disc - bit flakey paint but usable: £10 posted

Rear light unit - decent - £10 posted

Rear mudguard/snowplough - very good: £10 posted

Number plate light - very good: £5 posted

OEM snorkel/air box inlet - £5 posted

Rear shock - not bad: £10 posted

Mick..

[TheWeeSteev]

I've got a SK3 and the back left peg is a little bent so would happily take the set from you, I'm Dunfermline but work in Edinburgh so could pick up.

What's the chin thing you have?

[robertw95]

I'm interested in the rear hugger please

[Geordie Mick]

I'm interested in the rear hugger please

Rob - you again (I'm the bloke that came to see your zx6r the other week).

This is the oem mudguard/undertray, not a hugger. Not sure that'll have a home on your supertwin - yours if you want it though.

Mick..

[Geordie Mick]

I've got a SK3 and the back left peg is a little bent so would happily take the set from you, I'm Dunfermline but work in Edinburgh so could pick up.

What's the chin thing you have?

WeeSteev - I work in Leith so sure we can arrange summat. The peg on the lhs one's not the best, so might be worth swapping the peg from yours onto it.

The top fairing has a black plastic panel that goes under it (kind of around the lower yoke).

Mick..

[TheWeeSteev]

Cheers for the info Mick, I'll meet up to get that peg set next week if that's okay? I'm back in my office on Tuesday (I'm at the bottom of Holyrood Road beside Dynamic Earth.

The old peg is in good nick but I came off the bike down the Grassmarket a couple of months back and while fitting a new tail tidy I spotted that the left hand side pegs were bent from that slide.

I'll double check the chin section, I'm certain that bits okay on my wee bike though.

[Geordie Mick]

Cool - I'm back on 6th. I'll put them in the car so I've got them with me for whenever.

Mick..

[robertw95]

Ahh small world, your right im after the rear hugger cheers anyway.

[Geordie Mick]

List updated


MICK..

[spooon]

Hi Mick,

I don't suppose you could PM me a photo of the grab handle please, if it's still for sale?

Would you be able to post?

Thanks,

Tom

[Geordie Mick]

Tom,
Pretty sure it's still here. I'll dig it out when I'm home tonight. Postage no problem.

Mick..

[Geordie Mick]

liamstears - pics PM'ed


MatteX - pics emailed


Spooon (Tom) - pics PM'ed.


MICK..

[650]

Is the master cylinder still available and does it come with the banjo bolt?

[Geordie Mick]

Liamstears has first dibs, but yes it does. Has no switch and the rear part of the handlebar clamp has a mirror mount (that came off a triumph - I used the gixxer one).

Mick..

[650]

Well I've got the readies sat here right now, no umming, ahhing or faffing about...

Let me know :)

[650]

Actually, before I get...what size is the MC? 18mm or there abouts?

[Geordie Mick]

Whatever was standard fitment on a k5 gixxer thou. Might actually be a 19 but I'm not 100% sure.

I'll see what the other fella wants to do and get back to you, mate.

Mick..

[650]

No problem, I'll be waiting!

[Geordie Mick]

Front m/c and pillion grab handle now sold.

List updated.

Mick..