LiamHarvison
03-06-18, 10:15 AM
Hi all,
I've recently purchased another bike to replace my SV, so I'm taking a few bits off the SV before I sell it. There are a few other bits that I need to take off the bike, however I'll put these up once off as I'm not entirely sure when I'm going to get round to getting them off (ASV levers, Hyperpro progressive rear shock, etc). Parts available at the minute are:
Evotech exhaust hanger (black) -SOLD-
MRA double bubble screen (tinted): £40 + postage
https://drive.google.com/open?id=1u_l8-_S377JCVtWsWCDz-s647Wp4EXzR
There are a couple of small scratches just to the top left of the MRA logo, which you can see in one of the pictures above. Could probably be fixed fairly easily and not too visible on the bike as you can see from the photo showing it fitted.
Healtech GIpro gear indicator (blue LED 'DS type') -SOLD-
Healtech shift light pro: £65 + postage
https://drive.google.com/drive/folders/1wCABTA4HBsUjq_Ay1hnSuNTSFsKumq-Z?usp=sharing
Programmable via bluetooth from a phone. Installation instructions can be found on the Healtech website.
Scorpion Serket exhaust (carbon fibre): £280 + postage
https://drive.google.com/drive/folders/1BEScgk3c2oIIAzx3ueuqQntwt2pgX4P1?usp=sharing
Includes link pipe, connecting springs & baffle. No marks on the carbon fibre, only a few tar spots to get off. There is some tar burnt on to the metal parts of the exhaust which I'm sure could come off with some metal polish, along with a few on the link pipe (these are all mainly on the bike side of the exhaust, as seen in the photos). Small paint chip on the red ring around the pipe, which I only noticed when taking the photos.
Hopefully all of the links work!
Any questions, please feel free to ask :)
I've recently purchased another bike to replace my SV, so I'm taking a few bits off the SV before I sell it. There are a few other bits that I need to take off the bike, however I'll put these up once off as I'm not entirely sure when I'm going to get round to getting them off (ASV levers, Hyperpro progressive rear shock, etc). Parts available at the minute are:
Evotech exhaust hanger (black) -SOLD-
MRA double bubble screen (tinted): £40 + postage
https://drive.google.com/open?id=1u_l8-_S377JCVtWsWCDz-s647Wp4EXzR
There are a couple of small scratches just to the top left of the MRA logo, which you can see in one of the pictures above. Could probably be fixed fairly easily and not too visible on the bike as you can see from the photo showing it fitted.
Healtech GIpro gear indicator (blue LED 'DS type') -SOLD-
Healtech shift light pro: £65 + postage
https://drive.google.com/drive/folders/1wCABTA4HBsUjq_Ay1hnSuNTSFsKumq-Z?usp=sharing
Programmable via bluetooth from a phone. Installation instructions can be found on the Healtech website.
Scorpion Serket exhaust (carbon fibre): £280 + postage
https://drive.google.com/drive/folders/1BEScgk3c2oIIAzx3ueuqQntwt2pgX4P1?usp=sharing
Includes link pipe, connecting springs & baffle. No marks on the carbon fibre, only a few tar spots to get off. There is some tar burnt on to the metal parts of the exhaust which I'm sure could come off with some metal polish, along with a few on the link pipe (these are all mainly on the bike side of the exhaust, as seen in the photos). Small paint chip on the red ring around the pipe, which I only noticed when taking the photos.
Hopefully all of the links work!
Any questions, please feel free to ask :)