Othen
23-02-19, 07:46 AM
I've just swapped the oil lines on my K6 for an aftermarket kit, only the long line had failed, I took the opportunity to fit another oil cooler I'd previously cleaned up at the same time. These bits are left over and and free to a good home should anyone need them:
Oil cooler: needs a clean up but worked fine on the bike before the swap. The small bracket at the bottom that the protective mesh screws on has fallen off.
Short oil line: this also worked fine, according to the bike's service records this is a newer part.
https://i.imgur.com/rBA7sEqh.jpg
These are free if anyone wants to collect them (NN18 ).
£0.00
Alan
Oil cooler: needs a clean up but worked fine on the bike before the swap. The small bracket at the bottom that the protective mesh screws on has fallen off.
Short oil line: this also worked fine, according to the bike's service records this is a newer part.
https://i.imgur.com/rBA7sEqh.jpg
These are free if anyone wants to collect them (NN18 ).
£0.00
Alan