PDA

View Full Version : Curvy rear caliper, Pointy inlet cams, Bilbio's electrical gizmo


maviczap
01-05-20, 04:30 PM
Ok, a few more bits to clear out

Curvy rear caliper. Its been refurbished, new seals, stainless pad pins, stainless bleed screw, stainless caliper bolts

It was powder coated by a friend, but some flaked off when the caliper halves were bolted back together. But apart from this, its nice shiny black

Haven't tested it on the bike, as I never got round to fitting it, and the bike has gone :cry:

£40 ono (posted)

https://live.staticflickr.com/65535/49797303873_a977f0711e_c.jpg (https://flic.kr/p/2iSqcwH)IMG_20200420_155213 (https://flic.kr/p/2iSqcwH) by maviczap (https://www.flickr.com/photos/89416312@N07/), on Flickr


Pointy inlet cams £75 ono (posted)

The cheapest and quickest way to increase the horsepower on a curvy

Again, bought off here but never got round to fitting these

https://live.staticflickr.com/65535/49842088801_14e005bca7_c.jpg (https://flic.kr/p/2iWnJwD)IMG_20200501_172606 (https://flic.kr/p/2iWnJwD) by maviczap (https://www.flickr.com/photos/89416312@N07/), on Flickr

https://live.staticflickr.com/65535/49842391212_aec65639f9_c.jpg (https://flic.kr/p/2iWphqC)IMG_20200501_172616 (https://flic.kr/p/2iWphqC) by maviczap (https://www.flickr.com/photos/89416312@N07/), on Flickr

https://live.staticflickr.com/65535/49798159492_2f7c989ce8_c.jpg (https://flic.kr/p/2iSuzSL)IMG_20200420_155245 (https://flic.kr/p/2iSuzSL) by maviczap (https://www.flickr.com/photos/89416312@N07/), on Flickr


Bibio's electrical gizzmo

Allows 3 electrical devices to be connected safely to the battery, and isolates itself when the ignition is turned off

https://live.staticflickr.com/65535/48585052381_1494b56c58_c.jpg (https://flic.kr/p/2h2i6oV)IMG_20190820_155735 (https://flic.kr/p/2h2i6oV) by maviczap (https://www.flickr.com/photos/89416312@N07/), on Flickr

Ruffy
02-05-20, 03:05 PM
Hi Maviczap, You have PM re electrical gizmo.


Cheers.

maviczap
02-05-20, 04:14 PM
Electrical gizmo sold to Ruffy

Thanks

Ruffy
06-05-20, 12:47 PM
Gizmo received safely today.


Many thanks maviczap!

maviczap
06-05-20, 04:07 PM
Only the cams left

Spiral
23-04-21, 03:44 PM
Only the cams left

I'll have them if they are still corrosion free, do you still have my details ? Payment by paypal ?

maviczap
23-04-21, 03:59 PM
I'll have them if they are still corrosion free, do you still have my details ? Payment by paypal ?

Yep, still got your details and PayPal is fine

Spiral
23-04-21, 07:02 PM
Yep, still got your details and PayPal is fine

I've sent the money via paypal.

Now I just need to find out what jetting I need ....

maviczap
23-04-21, 07:36 PM
Thanks got it. Will send them ASAP