Wheezy
12-08-23, 03:07 AM
Hey all, probably a bit of a weird first post. Hope it's all within the rules, beat me up if not.
My SV650n K3 is stripped down to the frame for a front and rear end swap, and since this community has (unknowingly) helped me out as a knowledge resource when I needed to fix some problems on it, I thought I'd offer first refusal on parts before putting them generally up for sale elsewhere.
All parts came off the bike fully functioning at 36k mi:-
Almost complete Front end (£100), including:
- Wheel w. PR5 tire and 2mm of tread left - If I find the new bearings for them that I bought prematurely I'll throw those in
- Handlebar mounts
- Axle
- Discs, straight, (5.0mmish thickness)
- Calipers w. braided lines. seals re-done 2000mi ago (HH Pads but just get new ones)
- Mudguard (YD8 Metallic Sonic Silver I believe)
- Forks (original springs, 15W oil but might not be in there anymore, fork seals new 1000mi ago but they seem to have sprung a leak from being stored horizontal. No rust, but can't guarantee how much chrome has worn away in the movement area)
- Speedo sensor (the rotor is about to fall apart like cheese so you'll need that bit yourself)
- Top and bottom yokes (Naked yokes so won't mix n match with the S, obviously replace the bearings, top yoke has a few scratches from previous owner's keyrings and lucky charms)
- Mounting bracket for the clock - again, Naked, not S
Almost complete rear end (£80), including:
- Wheel w. PR5 tire, 2.5mmish of tread left, sprocket carrier and cush drives
- Axle
- Disc, straight, cannot remember thickness but comfortable above minimum
- Caliper w. braided lines, seals done 2000mi ago
- Swingarm w. dogbones and adjusters
- Shock (stock spring rate but honestly it's a bit tired out, if you need one in a hurry just cover postage and I'll give it to you)
Prices are nominal, I'm not immovable as long as they're actually useful to someone and it's sensible. It is easier to sell the front and rear as a single unit but if you need individual bits off that list then we can discuss. If you cover P+P I can ship it, if not then PM me to arrange a collection or neutral point to transfer!
ATB
Steve (Milton Keynes area - but on a blackbird nowadays)
My SV650n K3 is stripped down to the frame for a front and rear end swap, and since this community has (unknowingly) helped me out as a knowledge resource when I needed to fix some problems on it, I thought I'd offer first refusal on parts before putting them generally up for sale elsewhere.
All parts came off the bike fully functioning at 36k mi:-
Almost complete Front end (£100), including:
- Wheel w. PR5 tire and 2mm of tread left - If I find the new bearings for them that I bought prematurely I'll throw those in
- Handlebar mounts
- Axle
- Discs, straight, (5.0mmish thickness)
- Calipers w. braided lines. seals re-done 2000mi ago (HH Pads but just get new ones)
- Mudguard (YD8 Metallic Sonic Silver I believe)
- Forks (original springs, 15W oil but might not be in there anymore, fork seals new 1000mi ago but they seem to have sprung a leak from being stored horizontal. No rust, but can't guarantee how much chrome has worn away in the movement area)
- Speedo sensor (the rotor is about to fall apart like cheese so you'll need that bit yourself)
- Top and bottom yokes (Naked yokes so won't mix n match with the S, obviously replace the bearings, top yoke has a few scratches from previous owner's keyrings and lucky charms)
- Mounting bracket for the clock - again, Naked, not S
Almost complete rear end (£80), including:
- Wheel w. PR5 tire, 2.5mmish of tread left, sprocket carrier and cush drives
- Axle
- Disc, straight, cannot remember thickness but comfortable above minimum
- Caliper w. braided lines, seals done 2000mi ago
- Swingarm w. dogbones and adjusters
- Shock (stock spring rate but honestly it's a bit tired out, if you need one in a hurry just cover postage and I'll give it to you)
Prices are nominal, I'm not immovable as long as they're actually useful to someone and it's sensible. It is easier to sell the front and rear as a single unit but if you need individual bits off that list then we can discuss. If you cover P+P I can ship it, if not then PM me to arrange a collection or neutral point to transfer!
ATB
Steve (Milton Keynes area - but on a blackbird nowadays)