Help !!

[Iansv]

Anyone got any screw extractors I could borrow ? :( or stud extractor... dunno which i'll need

and can deliver ? or know anywhere I could get to locally without bike to buy ?

[pegasus]

you should be able to get them from any hardware or diy shop...ask for a screw tap.. should only be a couple of quid failing that ian your best bet is to use a drill with a 3.2MM hss bit and drill straight through it eventually it will just crumble

[Warren]

yeah id go for the drill option myself,

just drill a tiny hole dead in the centre of the offending article . . and the rest should just crumble out like cheese.


best of luck anyway tho.

[Iansv]

yeah i had a quick go with the drill, wasn't doing anything, will probably give it another go on sat then will have to warm bike up to get oil out

altho better to heat oil up first i would think, depending how much drips out

[Iansv]

ok forget that, gonna try and find a dealer to do it, not worth the risk

[checa]

Hi
I have not been on here for a while to busy with work. If you have not sorted your bike get in touch cos you could come round as i have all the tools you need :)

[Iansv]

Cheers for the offer mate but i'm gonna do a temporary seal this weekend with silicone and viney is sorting out for me over easter....

thanx again

[RobSV]

Hey Ian, what's the latest?

Are you sorted yet?

[Iansv]

nope....

still have a leak... its rideable for short hops but as soon as it gets hot it drips...

tis bunged up with silicone sealant atm

[jonboy]

but as soon as it gets hot it drips...

:shock:

.

[Iansv]

doesn't get hot on my trips to work... 7 miles..

max 2 or 3 drops..... Hopefully getting it sorted shortly

[checa]

So have you sorted it yet. if not i have all the stuff you need and can come round and do it if you want :)

[Iansv]

Thanks for the offer, pm me your number and i'll arrange something with you, I just need to get some flushing oil atm to flush it through after if any bits get in the sump