Indy Spacers

[GSXR Carlos]

Howdy all, got some motrax leds indicators for my birthday, i've heard all your problems but seem to have resistors supplied with mine :D

show i buy indy spacers or try and make some?

anyone tried this before, and got suggestions/details?

cheers

-Carl (21 now :lol:)

[mattSV]

For the sake of pising about, get the indy spacers - about £6.

My Motrax leds came with resistors as well, but they were crap.

Maplins do resistors for less than 50p each - might be worth getting a couple just incase.

[dirtydog]

the motrax indys do come with resistors but i found i needed 2 sets of the resistors to make them work. i made some new brackets from some aluminium i bought from B&Q took about 1/2 an hour to make and fit didnt cost much either. used the original brackets as templates.

[GSXR Carlos]

ok, i want indyspacers that fit my 2001 svs, anyone know which model fits, as i went into my dealers and they searched, but apparently they don't make them for my bike, does another set fit, anyone else done it?

[mattSV]

There are only 2 suzuki ones - the SV ones are the same as the gixxers I think

[northwind]

Or, you can just stick a bit of plastic against the back of the indicator holes using the original indicator brackets, then poke a hole in it and bolt the indicator to the plastic... Takes about 5 minutes, and works really well.

[GSXR Carlos]

Or, you can just stick a bit of plastic against the back of the indicator holes using the original indicator brackets, then poke a hole in it and bolt the indicator to the plastic... Takes about 5 minutes, and works really well.

sounds like a winner, i'll be trying it soon, busy weekend so might have a go on monday if it's raining and nobody's riding