View Full Version : Help... now with images (56k warning)
decided to wash me bike after a weekend of riding... :shock: :shock:
why are me tyre rubber all over my bike, never had that in winter, i can even peel some off like a piece of latex. now some of them are well settled under seat even though i had rear hugger. on the lower fairing, its the same story, and more so on the engine.. the pattern they got splatted on my bodywork and reg plate seems that they were like liquid when they were splatted on, and they are a bugger to get off...
can anyone tell me:
- is that actually me tyre rubber or just road tar?
- and why do you not get them in winter?
- and what's the best way of getting them off?
- if i leave them on the bike, would they provide protection in winter? :wink:
many thanks in advance...
Doesn't sound like tyre rubber???!!!!!
Could be tar. The best way to get it off is good ole trusty WD40.
Doesn't sound like tyre rubber???!!!!!
Could be tar. The best way to get it off is good ole trusty WD40.
Could be chain lube :?:
Car accessory shops sell tar spot remover which works well also
Vtwinlover
06-06-05, 08:16 PM
You haven't left your throttle open with the front brake on while wering ear plugs and tinted visor, at any traffic lights recently have you :?: :roll:
Sounds more like Burnout symptoms to me :wink:
Sensible answer :arrow: Cant see there being anyway it can be rubber unless you have been going hell for leather on super sticky's or have a hugger that is rubbing on the tyre even then i would expect the hugger to melt from the friction before the rubber.
http://www.friedmanarchives.com/California/images/Randys%20Doughnuts%20(Nikon%20Scan)%208x12%20300%2 0dpi.jpg
i will take a pic of what's left on my front fairing, and i def not have done any burn out as of yet :lol:
used wd40 and usually tar would kinda melt, but it didn't... it feels like rubber when i peel it off (a bit like rubber gloves). it stetches and then goes back to its original shape...
Doesn't sound like tyre rubber???!!!!!
Could be tar. The best way to get it off is good ole trusty WD40.
Could be chain lube :?:
Car accessory shops sell tar spot remover which works well also
thats what i recon.
chain wax, it goes thick and rubbery if not cleaned after a while (which is why i hate wax)
got some pics here now..
this is what's covered at the front on the engine...
http://www.zhutek.com/photos/sv650s/bin/2005-06-06_02.jpg
This is what's splatted on the bottom of lower fairing
http://www.zhutek.com/photos/sv650s/bin/2005-06-06_04.jpg
This is what it looks like under the seat, i've scrubed out the right hand side.. but as you can see, left hand side is pretty difficult to get rid of..
http://www.zhutek.com/photos/sv650s/bin/2005-06-06_05.jpg
This is what's left on the back of the reg plate, i pulled a piece outa bit so you guys can see.
http://www.zhutek.com/photos/sv650s/bin/2005-06-06_06.jpg
And the texture of it is exactly the same as those bits left from the tyre manufacture.
http://www.zhutek.com/photos/sv650s/bin/2005-06-06_07.jpg
if it is my rubber, then it must have melted when it got splashed all over the place, which I can't imagine how that would happen.
if it is road tar.. well, i have never seen that many in me life.
and it can't be the chain lub because it can't reach to the front fairing and engine case.
the last time i washed my bike 2 month ago, but i didn't ride for a month due to me fractured finger.. so this can only be the result of my last month ride which is on tarmac 100% of the time, and i def didn't do burn out.. :wink:
Any suggestions?
hall13uk
07-06-05, 12:16 AM
looks like overbanding tar fella. the stuff the highway maintance use to join differrent sections of road surface. imho.
hall13uk
07-06-05, 12:20 AM
now i think about it, it looks very much like luquid latex. if it peels of really easy i would say it behaves just like liquid latex too. but why would that be on the road :? . unless somebody has just dumped it a pot of it there weird :? .
just been spending couple of hours peeling the difficult part off... i don't want that to be on the engine for too long.. the ones on the exhaust have already gone solid. come to think of, i did went through a small patch of road work couple of days ago... that could be it. but how can they open the road if it wasn't dried? :evil: :evil: :evil: that still didn't explain why it feels like latex though... :roll:
Stormspiel
07-06-05, 08:21 AM
looks like overbanding tar fella. the stuff the highway maintance use to join differrent sections of road surface. imho.
That's probably what it is. I get the odd patch on mine from driving to my office :roll: . Work with all the road workers and they said it looks like overbanding tar. WD40 the fairing and it shouldn't stick as well, as for the engine ??? WD40 will just eveaporate with the heat so thats useless.
Shooter
07-06-05, 09:04 AM
YIKES what a mess !
Hard to believe you would not have seen something on the road that can cause this much effect.
Try Kerosene ( Parafin) on it. Use a paint brush to apply.
I use it on tar and chain lube fling and it is very effective on engine cases and stainless. I had a major problem with hot wet tar once and with a bit of diligent ,work the kero got it all off.
Cloggsy
07-06-05, 09:06 AM
Yup, deffo looks like overbanding - The stuff they use is like black mastic mixed with tar... Horrible stuff really :!:
Good luck getting it all of fella, WD40/Paraffin works well - If it has set solid, warm the bike up a bit, is should soften :wink:
Cheers guys for your help... i know what i'll be doing tonight now.. all fairing off the bike and got about 10 big cans of wd40 so it'll be fun...lol
get this up the sides of the car during summer - it's road tar and white spirit gets it off no problem - nothing is as effective at removing tar (10 to 15 min job with a paint brush trust me it's that easy)
WARNING - I can do this on the car because it's celulose paint and white spirit isn't a thinner for celulose, it is a thinner for other types of paint so just be carefull with types of paint/material but as long as it isn't oil based paint you'll be fine.
vBulletin® , Copyright ©2000-2025, Jelsoft Enterprises Ltd.