Assorted SV Parts (All Models)

[Mike1234]

K3 - K5
--------

Lock Set SOLD

Rear Subframe (K4)

Clutch Cover & Water Pump

Generator Cover (scuffed)

Yellow Front Fairing
- Scraped on one edge

Yellow Tail Unit

Yellow Grab Rail

Pillion Foot Rests

Air Box

Throttle Bodies

Wiring Loom

ECU

Brake Callipers (Pair)

Rear Brake Calliper & Master Cylinder

Pillion Seat (x2)

Screen

Clip Ons
- Right Hand Side

Mirrors
- Scuff on back of right hand mirror

ART End Can

Throttle & Cables

Clutch Lever Mount & Cable

Unfaired Top Yoke
- Needs bar risers

Pillion Foot Pegs

SY - K2
---------

Faired top & bottom yoke

Unfaired top & bottom yoke
- Needs bar risers

CDI

Rear Brake Disc

[Mervin]

Will that K3 lockset fit a K2?

[Mike1234]

Don't think so although I'm sure someone will be along who knows for sure in a minute.

Got a feeling the wiring is different but not sure whether the barrels are interchangeable (it only takes two screws to swap the barrel over). The tank lock and seat lock should fit okay.

I'm only in East London so if could remove your lock from the bike and bring it round we could try it out.

[Robw#70]

The filler caps on the tanks are different, may be able to swap locks though.
Ignition switches are different, can connect a carby to injected with wiring swaps but other way is more difficult :)

[Mike1234]

List Updated.

[norz]

Hi mate Im interested in the yoke ,is it easy to swap over as I want to change the ride position on my S & how much you want for it? ta.

[Mike1234]

Hi mate Im interested in the yoke ,is it easy to swap over as I want to change the ride position on my S & how much you want for it? ta.

To go from the S to the unfaired yoke will require:

- bars
- bar risers
- clutch cable (longer)
- throttle cables (longer)
- brake hoses (longer)

I'm sure someone will be along shortly to fill in the items I missed.

[Saint Matt]

Will the pillion pegs of a pointy fit a curvy?

[norz]

Hi mate,I know its a lot of bits to get to where I want so I'm looking to acquire bits as they come up,if the yoke will fit my K5 give me a price and we can go from there,meanwhile I'll be looking for the other bits on your very comprehensive list(twin Hel brake lines look loverrrly!!)Ta.

[SPeeeeDY]

You dont by any chance have an immaculate, standard RHS footrest end bobbin (slider) and rear brake lever for a K3S?


thanks

SPeeeeDY

[Mike1234]

Sorry, sold the foot rests and levers.