Kwak Regulator to fit on the SV

[Tris]

OK I've done the dirty deed and got a regulator off a ZX6 G2 to fit.

Question is, how do I wire the thing in :? :?

Its got 3 black wires and one each of Black/White, Black/Red & Black/Blue

I assume the 3 blacks go to the stator, but which way do the other 3 go?

Cheers

Tris

[Spanner Man]

Afetrnoon Tris.
The 3 blacks are probably the stator wires as you suggest.
The black and white is probably the earth
Red and black is probably the positive output
The Blue and black wire is most likely a voltage sensing wire, and should be wired to anything that becomes live when the ignition is turned on.
Give Sid a pm, he'll probably know the answer off the top of his head.

I shall check in the Kawasaki manual tomorrow and let you know what I reckon.

I'm not a great fan of this sort of thing, but if fitted correctly you should have no problems. Make sure you use good quality connections.

Cheers.