PDA

View Full Version : clutch has had it!

socommk23
10-03-06, 12:22 PM
my clutch has done 40k and started to slip when cold so cant be quick off the line!
is it an easy job to change the springs and plates???
any special tools needed?
gaskets?
socommk23
10-03-06, 01:20 PM
come on guys! someone must know?
petevtwin650
10-03-06, 01:23 PM
It's been quite a topic recently.

See here for a thread.

http://forums.sv650.org/viewtopic.php?t=34419
dieter
10-03-06, 02:25 PM
Hallo,

look there (http://www.svrider.de/index.php?seite=knowledgebase&artikel=76) its from our German SV-Site with a lot of photos (I think they talk for themthelves...)

I made it in just an half hour! 8 screws from the cover aus 6 screws on the springs thats it.
Be careful, one of the plates is different to the others (the last i think :?: )

Dieter
Viney
10-03-06, 02:38 PM
Hallo,

look there (http://www.svrider.de/index.php?seite=knowledgebase&artikel=76) its from our German SV-Site with a lot of photos (I think they talk for themthelves...)

I made it in just an half hour! 8 screws from the cover aus 6 screws on the springs thats it.
Be careful, one of the plates is different to the others (the last i think :?: )

Dieter

That seems a lot of pictures for just changing the clutch plates. Thats removing the entire clutch basket etc.
socommk23
10-03-06, 02:42 PM
cheers
v helpfull
socommk23
10-03-06, 06:11 PM
done and dusted!
kwak zzr
10-03-06, 06:14 PM
the clutch master!
socommk23
10-03-06, 06:21 PM
yeah. the pics were helpfull.....least i knew what to expect to see!
a real help...but just so easy to do!