Bitz & Peices

[TSM]

All bits are for pre K2 bikes, bits are from a 02' bike though apart from the pointy brake lines.

Jackup dog bones (20mm seat lift & 40mm rear lift approx). - £12 posted.

Carbs (fuel mix screws have been damaged, but are set for normal jetting) - £20
Pointy Stock Brake Front Lines - £10
Curvey Stock Brake Front & Rear Lines - £10
Fuel tank (without fuel cap/valve/sensor) crash damaged on left side, all intact & still holds fuel and with baglux cover is not noticable, usefull for racers. - £20
Kwak ZX6 A1P shock - £25

Rear subframe, only good for project or racing. The regulator mount has been removed & rear lock mount has been damaged.

Clock surround, i have one painted in Y9F, all intact but it was left outside for a long time so is a bit mucky and weathered & possably need repainting

I have some other plastics that i may want to get rid of.

Front Forks (Right ok, Left stanchon has a small crease but was straightened as much as possable, has 10w fork oil and prog springs with preload caps installed & stock springs (boxed), fork lowers are in good condition) - £80 [GONE - Pending Payment]
Front Yokes (Top & Bottom) - £25
Clipons - £20 (Pair)
OEM Full Exhaust System (20k) - £10
OEM Undertray - £10


GSXR SRAD 600 Ignition + Fuel Cap with 1 key (should work on SV) - £20
GSXR SRAD 600 Uprated fork springs - £25

GSXR K2+ Calipers & OEM Lines - £40

Oh and also loads of bits from an RF400

[21QUEST]

...........GSXR SRAD 600 Uprated fork springs - £25

........

What's the spring rate for these uprated springs?

Check on the end of the springs . Afternarket springs usually have the rates engraved on the flats.

Cheers
Ben

[TSM]

...........GSXR SRAD 600 Uprated fork springs - £25

........

What's the spring rate for these uprated springs?

Check on the end of the springs . Afternarket springs usually have the rates engraved on the flats.

Cheers
Ben

They have nothing on them at all. I know they are diffrent though as compared to another set of same forks. This spring is longer than the other forks which were sold as completley standard while these were from forks that were setup for the track. Sorry not much help.

[Phantomtek]

Hi will the undertray fit an SK1 model?

[TSM]

Hi will the undertray fit an SK1 model?

I see no reason why it will not as mine is an SK2

[Phantomtek]

Hi will the undertray fit an SK1 model?

I see no reason why it will not as mine is an SK2

I forgot to ask, what colour is it? :oops:

And how much will postage be?

Cheers.

[TSM]

Hi will the undertray fit an SK1 model?

I see no reason why it will not as mine is an SK2

I forgot to ask, what colour is it? :oops:

And how much will postage be?

Cheers.

All OEM undertrays are black, this is the stock one not an aftermarket thing.

[Phantomtek]

Cool I'll take it, how much is postage to Leeds?

Cheers.

[dougieo]

Hi do you have the left front fairing there intact mate cheers