Will this fit easily? full akropovic system

[Jools'SV Now]

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=8077114108&rd=1&sspagename=STRK%3AMEWA%3AIT&rd=1

If fitted, will any changes to fueling be required?
Power commander etc?

pointy 54, k3/k4

[andyaikido]

Fitting the new system should be simple but getting the old one off may be more difficult.
I took the original system off at 8k and had to hacksaw through a mounting bolt underneath and eventually had to send it to the garage as i couldn't get the rear header bolts out.
The tech had to remove the swingarm to get a blowtorch on the bolts!
My sv was very rich as standard so the new system ran much better without any fuelling mods but best to get it dyno'd to be sure.

p.s. Dynojet dyno's give better (ie. higher) figures :wink:

[Jools'SV Now]

It's had a hugger on from new, so hopefully will undo ok.

had the down pipe off to give it a good polish last week and that was ok with some wd40 and 5mins to soak in.

Thinking of different end can/system as the original endcan is scratched and very slightly dinged from the Mrs's offs.

Plus of course. LOUD is GOOD. :twisted:

There's a limit to noise officer? Really? are you sure?

[Speedy]

GET IT! They are AWESOME! (I have one and fitted it myself.....EASY!!!)

I also have a Power Commander,does make a nice difference,but you would need to get it dyno'd to get the most from it! :wink:

You don't need to get one though,mine ran fine without it,and a noticeable difference to the bike with the Akro system!

I've also heard that Suzuki do remaps! I may be wrong!

If you want any pictures of my system fitted,PM me!