Duck
19-10-06, 09:35 AM
After 7 years I am parting with my SV for a Falco, I have the following left over from an incident with a Pheasant.
Fuel tank (filler cap not included): . A couple of very light scratches, and a tiny pinhole just visible above the “S” on the side of the tank,nothing that you wouldn’t get with normal careful use.
http://upload4.postimage.org/1111466/TankRH2.jpg (http://upload4.postimage.org/1111466/photo_hosting.html)http://upload4.postimage.org/1111461/TankLH.jpg (http://upload4.postimage.org/1111461/photo_hosting.html)http://upload4.postimage.org/1111469/TankRH.jpg (http://upload4.postimage.org/1111469/photo_hosting.html)http://upload4.postimage.org/1111472/Tank_Top.jpg (http://upload4.postimage.org/1111472/photo_hosting.html)
Standard exhaust system.
Silencer is fairly well bashed & scraped, but the pipes are okay, be fine if you are going to fit an aftermarket can. (I can cut off the Can before posting, does not include the header pipes)
http://upload4.postimage.org/1111442/Exhaust.jpg (http://upload4.postimage.org/1111442/photo_hosting.html)
Radiator.
Has had a twist but I am assured that it is will straighten out easily. It does not leak at all. (I rode the bike for 2 months after my prang, while waiting on new parts)
Fuel tank (filler cap not included): . A couple of very light scratches, and a tiny pinhole just visible above the “S” on the side of the tank,nothing that you wouldn’t get with normal careful use.
http://upload4.postimage.org/1111466/TankRH2.jpg (http://upload4.postimage.org/1111466/photo_hosting.html)http://upload4.postimage.org/1111461/TankLH.jpg (http://upload4.postimage.org/1111461/photo_hosting.html)http://upload4.postimage.org/1111469/TankRH.jpg (http://upload4.postimage.org/1111469/photo_hosting.html)http://upload4.postimage.org/1111472/Tank_Top.jpg (http://upload4.postimage.org/1111472/photo_hosting.html)
Standard exhaust system.
Silencer is fairly well bashed & scraped, but the pipes are okay, be fine if you are going to fit an aftermarket can. (I can cut off the Can before posting, does not include the header pipes)
http://upload4.postimage.org/1111442/Exhaust.jpg (http://upload4.postimage.org/1111442/photo_hosting.html)
Radiator.
Has had a twist but I am assured that it is will straighten out easily. It does not leak at all. (I rode the bike for 2 months after my prang, while waiting on new parts)