micron exhausts.

[kwak zzr]

on this sv1000 ive got there is twin micron's (beta) i think, anyway i took the baffles out today and guess what? there just tubes with no real baffle in there :roll: now my question is has someone cut the restricting end off the baffles or is the micron beta can a race can and someone has just fitted these tubes to make it look like there are baffles in?

[diamond]

My Remus baffle, fizz's blue flame on his SV and his yoshi on his Gixxer all have baffles that are just pipes nothing more. Not sure how it works but it does. :?:

[on yer bike]

on a quick google I found...
"Beta - High performance race cans - NOT for road use"

[kwak zzr]

My Remus baffle, fizz's blue flame on his SV and his yoshi on his Gixxer all have baffles that are just pipes nothing more. Not sure how it works but it does. :?:

i removed the baffles with the engine running and there was no sound diff?

[diamond]

Can't explain that, but it definatly made a difference on my Remus, and Fizz says it makes a huge difference on his Blue Flame.

[kwak zzr]

i think their prob race cans and someone has done a quick homemade job on them.

[netsurfer]

Not exactly the same thing, but I had a micron can ages ago, the tube (baffle) inside it has holes in it, and was wrapped with some sort of matting a bit like fibreglass only a lot more heat resistant.

Pete

[Carl]

For what it's worth my LeoVince exhaust is just a short metal tube with no kind of perforations / baffle etc, and is open at one end but closed at the (internal) end. Looks like a bit of a crude d***do! (If you don't know what one is go ask your mum).
There was VERY LITTTLE difference to the noise with the baffle in or out but it was a slightly "softer" noise with the baffle in.... So I took it out! :lol:

[kwak zzr]

open at one end but closed at the (internal) end.

mines open at both ends :? just a tube doing nothing :roll:

[TSM]

Ive got a Beta can and pipework, it is not road legal "apparently". It has not markings on it either way, so you "may" pass an MOT.

If you want a baffle, just get one from the Delta can and fit it, or probably nearly every other can manuf and most will just require a hole to be drilled for the bolt/rivet.

[kwak zzr]

looks like my scorpion baffle will fit straight in there if need be :roll: