i have a problem...

[maff]

after fitting my tail tidy (bought from redbeeproducts off ebay-dont go there)

im now left with this.....

http://img170.imageshack.us/img170/6436/dsc00581cw5.jpg (http://imageshack.us)

one great big gap... godd innit? :(

any suggestions on what i could do? or praps an undertray that would fit and needs no cutting?

quick. i feel like crying!:smt022

[Rich]

This is the reason why i didn't get a tail tidy and went for the undertray. Why the hell do they make them with the gaps? Surely its just as easy to make them properly than not :smt102.. If your only worried about water getting in there you could always use clear silicon to fill the gap!! Apart from that, i suppose you could coverer from the inside with some black plastic or something glued/taped in place!!

Wonder what others have done, is there actually one they make that fits properly??

[Stu]

I can't see any gap in the picture, but you could use a roll of draught excluder if the gap is not too big.

[hovis]

im not too sure whats wrong?

is it that the plate is lower than you wanted?

get a new plate & drill it lower down .perhaps

[Rich]

I hope this helps you all out,, sorry stoppy jumping in :roll:

http://i168.photobucket.com/albums/u175/1RichSV650/dsc00581cw5-1.jpg

[maff]

cant see the gap....

because the shovel has been removed, the undertay has nothing to fit into. leaving a gap revealing the screws that attatch the tailtidy to the framework underneath.

was thinking of gaffa taping it up till i can think of something to do to it

[maff]

im not too sure whats wrong?

is it that the plate is lower than you wanted?

get a new plate & drill it lower down .perhaps

nothing to do with the number plate. im going to get a smaller one eventually to raise it up between the indy ut the gap is still there

[hovis]

sorry, i still cant see the problem

[maff]

http://img294.imageshack.us/img294/2030/tailtidygapsl5.jpg (http://imageshack.us)

[rs_tubby]

can u not get an undertray and then fit the tail tidy to it or dont you wish to do that?

[Stu]

http://i71.photobucket.com/albums/i136/stu369/DSC00157.jpg
Tell me address if you want me to send you some so you can try it for yourself. But do you have the 2 pieces of plastic that I have? It won't fill the enormouse gap if you don't.

[Stu]

Stoppy, aren't you missing a whole piece of plastic (indicated) I didn't do mine so I don't know what's involved. The draught excluder is only for 5mm I don't think it will fill the gaps you point to in yellow
http://i71.photobucket.com/albums/i136/stu369/that.jpg

[gettin2dizzy]

I got the same one and its ****. It rusted to bits really really quickly too. Wondering what to do myself!

[maff]

bugger buger b*****ks!

think ill have to chop up the original shovel and try and fit it that way!

or buy a different tail tidy

[mattSV]

bugger buger b*****ks!

think ill have to chop up the original shovel and try and fit it that way!

or buy a HAMICAD

;)

[maff]

hamicad.......

havent got a pic i could see of yours by any chance? :)

pwetty pwease