fat_brstd
24-07-07, 11:57 AM
Having got my tl i have been having a few problems with it. It all seemed in good order but i have now realised that the fan on the radiator doesnt work at all so the only way to keep the bike cool is to ride very fast. Also my high beam indicator light on the dash doesnt appear to be working all the time but the indicator light on the dash is fine as is the low fuel light. could it be something as simple as a fuse or am i going to have to strip the front off it and actually work out whats going on. Note that i really really suck at electrics, im fine with mechanical things i can see moving but wires confuse me.
Im getting an engine temp read out on the bottom of the tach but im not sure if this is the trigger for the radiator fan or if its a different heat sensor. If i get the engine up to temp 65-70 degrees and then try and manually start the fan moving it spins from me flicking it but doesnt carry on working so its not the motor on the fan failing to have enough touque to get it moving and it does spin fine when manually moving it around, its doesnt have anything stopping it from spinning.
The bike does have a different rear light unit on it, its an led thing with integrated indicators which i know the previous owner had to mess about with because they were an mot fail. He may have cut something he shouldnt have but when i wired it back in it was just 2 wires under the seat hump.
Just hopping someone might have some ideas so i can have a go at it rather than paying for womeone else to bodge the electrics about even more. cheers guys
Im getting an engine temp read out on the bottom of the tach but im not sure if this is the trigger for the radiator fan or if its a different heat sensor. If i get the engine up to temp 65-70 degrees and then try and manually start the fan moving it spins from me flicking it but doesnt carry on working so its not the motor on the fan failing to have enough touque to get it moving and it does spin fine when manually moving it around, its doesnt have anything stopping it from spinning.
The bike does have a different rear light unit on it, its an led thing with integrated indicators which i know the previous owner had to mess about with because they were an mot fail. He may have cut something he shouldnt have but when i wired it back in it was just 2 wires under the seat hump.
Just hopping someone might have some ideas so i can have a go at it rather than paying for womeone else to bodge the electrics about even more. cheers guys