PDA

View Full Version : diamond brite


lancasterlad
14-10-07, 05:43 PM
Very easy to apply supplied with instructions.
How it works
The hard, high gloss protective
Paint Protection and Sealant
Why pay between £150-200 to have Diamondbrite applied when you can do it yourself and no more polishing on the weekends. Jewelultra Diamondbrite prevents road salts, traffic film, acid rain, fallout from factories, tree sap,and other atmospheric pollutants from contacting your bikes paintwork. Fading from ultraviolet light is virtually eliminated as is nitrate etching caused by bird droppings.
Once treated with the Jewelultra Diamondbrite process you will never have to polish your bike again.
YOU WILL BE AMAZED AT THE RESULTS
the price for stage 1+2 is £8 inc P&P

Horney
14-10-07, 06:59 PM
How much would it be for enough to do a 3 door hatchback?

lancasterlad
14-10-07, 08:21 PM
1 kit is enough for 1 car or 3 bikes. but once open it has to be used so you could do your car plus your bike

Viney
15-10-07, 08:36 AM
With diamodbrite or any other of these 'coatings' you will have to clean, and cut the bodywork 1st off. This is best done with the diamondbrite cutting compound which isnt in the kit above. I have had some funny reactions when using T-cut and the diamond brite polish kit.

lancasterlad
15-10-07, 11:26 AM
i dont think so mate, i use this stuff every day at work, on new and used and it works fine

petevtwin650
15-10-07, 11:33 AM
thats a load of s**t mate i use this stuff every day at work

Think you might want to tone down your reply.

Viney
15-10-07, 12:12 PM
i dont think so mate, i use this stuff every day at work, on new and used and it works fineThen you must be a lucky sod.

Only going on past experience on many a car. DB is a 3 stage system, and you can only ever buy the aftercare pack which is what is sold on Ebay.

lancasterlad
15-10-07, 01:26 PM
whats the 3 stage?
been doing this job for 5 years now,
and theres only 1&2