SV650.org - SV650 & Gladius 650 Forum - car mechanics, any ever sweated on a new reluctor ring?

Page 2 of 2

Show 40 post(s) from this thread on one page

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)

- Idle Banter (http://forums.sv650.org/forumdisplay.php?f=116)

- - car mechanics, any ever sweated on a new reluctor ring? (http://forums.sv650.org/showthread.php?t=173813)

timwilky

03-01-12 11:36 AM

Re: car mechanics, any ever sweated on a new reluctor ring?

I have a bearing remover that works quite well with the hub still on the car, simply remove the circlip, fit spacer over hub and drift behind the bearing, long bolt through drift/bearing/spacer and wind out the bearing. Last bearings I replaced were on a polo and took about 30mins/side

GIZZY66

03-01-12 11:46 AM

Re: car mechanics, any ever sweated on a new reluctor ring?

That sounds like a plan , how do you get the flange off ? .

timwilky

03-01-12 12:40 PM

Re: car mechanics, any ever sweated on a new reluctor ring?

see http://www.twsoft.co.uk/sv/VS7020.pdf

Teejayexc

03-01-12 03:34 PM

Re: car mechanics, any ever sweated on a new reluctor ring?

Mods, please monitor this thread....

sweaty rings, flange, ball joints ! I'm going for a lie down :-(

appollo1

04-01-12 09:16 AM

Re: car mechanics, any ever sweated on a new reluctor ring?

Quote:

Originally Posted by Teejayexc (Post 2643171)

Mods, please monitor this thread....

sweaty rings, flange, ball joints ! I'm going for a lie down :-(

:laughat:

All times are GMT. The time now is 03:56 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page