SV650.org - SV650 & Gladius 650 Forum

Page 2 of 2

Show 40 post(s) from this thread on one page

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)

- Bikes - Talk & Issues (http://forums.sv650.org/forumdisplay.php?f=129)

- - Bolts (http://forums.sv650.org/showthread.php?t=237875)

DarrenSV650S

15-11-20 04:40 PM

Re: Bolts

No it's aluminium so no chance of drilling it wider

https://i.imgur.com/wV8C6zH.jpg

https://i.imgur.com/p9zTjQ4.jpg

Adam Ef

15-11-20 06:50 PM

Re: Bolts

I had similar on a bicycle stem. Easton stems use m6 bolts that have a head the size that an M5 bolt would have. Had to grind a bit off the head for it to fit in.

Craigg

01-01-21 02:20 PM

Re: Bolts

https://www.stainlessautomotivefaste...2ki9p284nn3c57

I bought from this place for a similar issue with my old SV. they give the head width measurement so you can see if it will work.

I dont think you will get smaller than 14mm for an M10 bolt though!

DarrenSV650S

01-01-21 03:47 PM

Re: Bolts

I used a file on one bolt with the bolt held in a drill. It took a long time and as NedSVS said the file got clogged up pretty quickly. It's an old file so I wasn't too bothered. Got the dremel out for the other bolt. Much quicker

Finished them with some sand paper

All times are GMT. The time now is 04:52 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page