Re: done the home made undertray thing
 

Cut it out of the side of his washing machine.

Re: done the home made undertray thing
 

hey quiff your a dab hand with a kitchen knife! looks better mate.

Re: done the home made undertray thing
 

well it still aint finished- too much work-

got in at 4.15am this morning..and out again in an hour.!


Grinch- yea from B &Q- a bigger one though- they have loads all sealed in plastic.. cost about £8 .. and there will be enough left over for me to make saddle shutters too.

Re: done the home made undertray thing
 

So that number plate against the wall is from your old motorcycle that you no longer own right :?:

Re: done the home made undertray thing
 

yea thats right- was just tryin it for size

Re: done the home made undertray thing
 

I like the handywork Mr Quif......seeing the time of your last post u must be part of the insomniacs....or is it a night shft thing

Re: done the home made undertray thing
 

na I just got in from wrk..
night job down Surre.. now must bed- on at 12 middday tomoz..

Re: done the home made undertray thing
 

well its comin on ...

nearly done.. .. just the light going and my neighbour chatting slowed me down- should be finished tommorrow.. ,,,

Re: done the home made undertray thing
 

few pics.. not too many- ha ha ..


just finished cleaning up the undertray then primed and painted it.

made my own bracket for the numberplate out of a cheap tool hangard from fcus.. and then cut a strip of the spare undertray metal that was leftover and bent and drilled the ends for the indis.. and holes in line with the holes onthe numb plate holder.. so the plastic number plate bolts hold it all together

http://i22.photobucket.com/albums/b3...Image000-2.jpg

http://i22.photobucket.com/albums/b3...r/Image005.jpg

http://i22.photobucket.com/albums/b3...r/Image007.jpg

bottom pic.. larger holes- the numb plate bracket slides in through there and the long hoks are then layed flat on the reverse of the undertray .. these have holes in them down which are fed LED lights fo the plate.. . the LED's feed up from below and the locking nut for these also acts as a lock nut for keeping the number plate bracket in place. (all nuts blue locktite)




as per below-- ... small holes line up with the holes in the "arms" of the number P bracket that feed back through.. the the LED pushes fronthe undertray side through tthe tray and through the holes in the numb P bracket and locks down with the nut above- under the seat.

http://i22.photobucket.com/albums/b3...r/Image010.jpg

http://i22.photobucket.com/albums/b3...r/Image014.jpg


http://i22.photobucket.com/albums/b3...r/Image013.jpg

Re: done the home made undertray thing
 

http://i22.photobucket.com/albums/b3...r/Image027.jpg

http://i22.photobucket.com/albums/b3...beaver/123.jpg

just lots of time and lots of tea.. and sitting thinking and planning..

and the odd nip in here to check out the site and the way others have done it..


tomoz.. should get it all double checked .. and the indis on.. will do them all neatly and hide the wires.. feed the wires up through the back of the number plate bracket holes and small zip tie them to the down brackets so they arent visible.. .. that is the plan..


the LED's just simply keep the orig wire that fed the number plate light- twist the same 2 colurs together off the 2 LEDs and then crimp onto the orig wire.(shortening the wire of course as there is looooaddsss of it.!