SV650.org - SV650 & Gladius 650 Forum - Replace broken gear lever?

Page 2 of 2

Show 40 post(s) from this thread on one page

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)

- SV Talk, Tuning & Tweaking (http://forums.sv650.org/forumdisplay.php?f=111)

- - Replace broken gear lever? (http://forums.sv650.org/showthread.php?t=93516)

ljharmitt

17-04-08 11:18 AM

Re: Replace broken gear lever?

Quote:

Originally Posted by yorkie_chris (Post 1480505)

They can be annoying, dizzyblondes yellow bike was a pig for this, the levers were so stiff, I ended up using the big hammer method.

Tried the big hammer method didnt work so ended up using hot water to expand it, straight out ;)

thinman

19-04-08 12:27 PM

Re: Replace broken gear lever?

turns out something disconnected in the clutch so they were able to fix it easily. Back on the road and waiting for a dry day to ride!

danco1

29-07-09 10:38 AM

Re: Replace broken gear lever?

Did you have much of a problem repairing or replacing your left front turn signal? I have one broken off now and am seeking guidance on how to replace or repair. I think it must have broken off while I was pulling off a rather substantial fabric bike cover from my 2002 SV650S.
Thanks!

thinman

30-07-09 08:57 AM

Re: Replace broken gear lever?

yea if I remember correctly it was a dodle. Take the fairing off, disconnect old wires and then feed through the hole in the fairing and connect.

Paul Locker

19-10-12 10:21 PM

Re: Replace broken gear lever?

My clutch lever broke off tonight when the side stand was not fully extended by myself!!!! What a %%%% I am...broke my front left indicator too...gear lever bent!!! Just a lapse of concentration!!!Costly!!!!!

All times are GMT. The time now is 03:03 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page