SV650.org - SV650 & Gladius 650 Forum - GSXR750 K7 Front End (90%) Done

Page 3 of 3

Show 40 post(s) from this thread on one page

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)

- SV Talk, Tuning & Tweaking (http://forums.sv650.org/forumdisplay.php?f=111)

- - GSXR750 K7 Front End (90%) Done (http://forums.sv650.org/showthread.php?t=120167)

Dangerous Dave

26-10-08 05:41 PM

Re: GSXR750 K7 Front End (90%) Done

Quote:

Originally Posted by yorkie_chris (Post 1667126)

you can get drilled ones and bolt them straight into the rivets.

Any ideas where Chris, I am considering changing the rear end of the 800 and this will dump the OEM rear wheel speedo set up.

yorkie_chris

26-10-08 05:43 PM

Re: GSXR750 K7 Front End (90%) Done

evilbay. Search countersunk magnets or countersunk neowhattsamaydyne

Dangerous Dave

26-10-08 05:46 PM

Re: GSXR750 K7 Front End (90%) Done

Quote:

Originally Posted by yorkie_chris (Post 1667153)

evilbay. Search countersunk magnets or countersunk neowhattsamaydyne

Ta, I may need to pick your brains at a later point if you don't mind....

yorkie_chris

26-10-08 05:49 PM

Re: GSXR750 K7 Front End (90%) Done

Feel free, it's not difficult to do though. Hardest bit is wiring the sensor, the sensor I got gave little clue as to which wire was what.

http://cgi.ebay.co.uk/NEODYMIUM-COUN...d=p3286.c0.m14

those will do the trick, pretty similar to ones I've got.

All times are GMT. The time now is 07:57 PM.

Page 3 of 3

Show 40 post(s) from this thread on one page