Re: Throttle cable routing/longer cables? Curvy.
 

Ok, all done.
I fitted a std top yoke of a N which had the high risers.
I used a renthal low road bar.
Only thing I had to do was replace the original washer which goes under the yoke nut, I had to use a 5mm thick one.
All cable lengths were fine as I re routed them as suggested in this thread.
Brake pipe was not long enough. However I fitted race lines which went to my master cylinder of a r6 2co.
Fitted a double bubble screen and ass is perfect now.

Thanks all will try get picks up soon