1979 Suzuki X5 Long term rebuild
Hi.
I seemed to have put my rebuild in the wrong part of the forum. If you would like to see how this started, the thread is here https://forums.sv650.org/showthread.php?t=231180 So, with Christmas upon us, progress has been slow. New tyres were fitted & not a lot else has happened. I've ordered some new parts & even found a couple of impossible to find bits in Indonesia of all places :cool:. The 1st impossible piece is the handlebar cover. This is a small piece of plastic with "Suzuki" embossed on it. Sat on Ebay at stupid o'clock in the morning & came across this part after hours of trawling. https://scontent-lht6-1.xx.fbcdn.net...08&oe=5C916A6D The Suzuki part isn't painted on the X5, so I took some very fine wire wool & sanded it all off. I then had to make a bracket out of some aluminium plate I have in the shed & fitted it. I'm really pleased as it looks OE. https://scontent-lht6-1.xx.fbcdn.net...59&oe=5CCF1862 I also noticed that when the tyres were fitted, the shocks looked wrong. I was correct, when I measured them, they were 280mm centre to centre, X5 shocks are 300mm. I found a compnay called TEC, their shocks look just like standard & were a great price too. They arrived within a couple of days & were really easy to fit. They have made one heck of a difference. https://scontent-lht6-1.xx.fbcdn.net...64&oe=5CCD799C I've also found a brand new old stock chain cover from the same place in Indonesia & a brand new tail piece cover from a seller in the UK, but waiting for these to arrive. Today I had some indicators & the front mudguard arrive, so, after work set to in the shed to fit them. The indicators were nice & easy to fit, but the pattern mudguard was a different story. I've had to drill the mounting holes, so used the original as a template. When I drilled the holes & mounted it. Unfortunately, it's sitting a little high, so, tomorrow after work, I'll do some jigging & filing to get it sitting right. https://scontent-lht6-1.xx.fbcdn.net...ea&oe=5CD0C187 Hopefully I should have a few more parts turning up over the next few days. |
Re: 1979 Suzuki X5 Long term rebuild
This is really coming together nicely now Col. It looks so close to being there.
|
Re: 1979 Suzuki X5 Long term rebuild
It's looking great! I have a memory that the plastic handlebar trim on my old X5 had the lettering picked out in silver, but that may not be correct.
|
Re: 1979 Suzuki X5 Long term rebuild
A labour of love there Col, especially sourcing those difficult parts
|
Re: 1979 Suzuki X5 Long term rebuild
Col - you're quite the magician my friend. Wish I had the patience to do something like this.
|
Re: 1979 Suzuki X5 Long term rebuild
Quote:
Quote:
Quote:
Quote:
|
Re: 1979 Suzuki X5 Long term rebuild
looking superb :-)
|
Re: 1979 Suzuki X5 Long term rebuild
Came home from work today & found that another couple of items had dropped through the letterbox. The correct kickstart & a pair of fork reflectors, so, after going food shopping with the missus, I headed off into my leaky shed to play.
The kickstart was plug & play, so a quick tap with a mallet & tighten a screw, it's on :) https://scontent-lht6-1.xx.fbcdn.net...19&oe=5CD95E48 Next on the agenda was lowering the front mudguard. It didn't take me too long to re drill 4 holes a little further down the ribs & check to see what it looked like. In my opinion, a lot better. It could go lower still, but I think it looks right now. I took the grinder to the excess webbing & ground it to tidy it up. https://scontent-lht6-1.xx.fbcdn.net...c4&oe=5C8D263F The last part today were the fork reflectors. I ordered 2 from China for £2.20 delivered. When I opened the packaging, there were 2 PAIRS in the bag. So I had 4 reflectors for £2.20 delivered from China, how on earth is that possible? I did have a slight problem as the screws on the reflectors were 6mm & the holes in the yoke are 5mm. I took a reflector apart to see how they were made & it had a screw bonded into the plastic. I used my grinder to get rid of the excess plastic, removed the screw & replaced it with a 5mm one. I screwed it into the yoke & replaced the reflector top. It's as good as new :) https://scontent-lht6-1.xx.fbcdn.net...b0&oe=5CCE6D16 |
Re: 1979 Suzuki X5 Long term rebuild
I assume the hole in the mudguard is for a speedo cable guide/fixing?
|
Re: 1979 Suzuki X5 Long term rebuild
Quote:
|
All times are GMT. The time now is 09:27 AM. |
Powered by vBulletin® - Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.