Stubbied Akrapovic
 

I bought a damaged Akrapovic can at the weekend with the intention of swopping it for the identical one on my CBR600 trackbike. But, when I put the nice Akra on my SV it was way too long. So I chopped 5 inches off the front (damaged) end and tomorrow I'll go have a new band fitted by Mark Hill at MHP in Stevenage. I took some pics just to see what it will look like _ I think it looks pretty good

How much I cut off, you can see the damage bit on the right

http://farm4.static.flickr.com/3026/...0e3073.jpg?v=0

The damaged bit

http://farm3.static.flickr.com/2318/...bc4c76.jpg?v=0

On the bike

http://farm4.static.flickr.com/3157/...df6d2d.jpg?v=0

Full view

http://farm4.static.flickr.com/3038/...d994dd6a_b.jpg

Re: Stubbied Akrapovic
 

looks good lozzo, an improvement on the standard size jobbie:)

Re: Stubbied Akrapovic
 

Nice can Lozzo, looks good :) Even better cause it's on a black pointy !

GOnna trash my can so Lozzo can do that to mine...... arrchh shh don't tempt fate LOL

Re: Stubbied Akrapovic
 

Looks good mate! It is Titanium? and was it difficult to cut? Just curious!

Re: Stubbied Akrapovic
 

Was a doddle to cut with a 4 1/2 inch cutting disc. I then cleaned the cut edge with my Dremel fitted with an emery linishing wheel. It makes loads of sparks when it's being cut and a very bright spot appears, almost like the point of penetration when Mig welding steel, that makes it difficult to see the line you're cutting to, so I re-marked it in marker pen.

Re: Stubbied Akrapovic
 

You made it bleed and squeal - cruel Lozzo :smt084

Re: Stubbied Akrapovic
 

Nice job , Looks Ravishing :D

Re: Stubbied Akrapovic
 

Serious Lozzo come and sort my beast out on my bike and make it squeal like that, I want a ikle can like you ... we could have matching cans !!!

Re: Stubbied Akrapovic
 

I could do, but it's such a shame to chop a nice new and good condition can like this. It's always worth doing to a damaged one that's worth buttons, but not to a good one.

Re: Stubbied Akrapovic
 

That's why i cut my akra down, i took just under 7 inches off mine though 8-)

Re: Stubbied Akrapovic
 

I would have cut 6 inches off, but I didn't want the hanging strap overlapping the Akra sticker.

Re: Stubbied Akrapovic
 

I chopped a stock R6 can down a while ago to fit to my race bike on strict track days. I took most of the internals out and was surprised at just how much metalwork is inside. Some seriously heavy bits of metal ended up in my spares bin :-)

I was running a Vance and Hines race system and can and that could serously make some noise. Made me paranoid on the track as it always sounded like someone right behind me!

Re: Stubbied Akrapovic
 

Ah fair enough, i managed to scrape my sticker a while ago so just peeled it off. I also turned the end cap round as that had a scrape on it as well
here's what mine looks like now

http://i181.photobucket.com/albums/x...8/IMGP1109.jpg

Re: Stubbied Akrapovic
 

Looks ace most cans on bikes are to long and need a trim to look right. I stubbied the cans on my sv1000 and they look much neater.

Re: Stubbied Akrapovic
 

That looks good. Mine had a smacked front end cap as well, but Mark at MHP says he'll be getting all the marking and dents out of it when he's putting it all together for me. He says I won't be able to notice it has ever been smacked. I'll post pics when I get it back.

Re: Stubbied Akrapovic
 

Did whoever smack your can make a good mess of it then Lozzo! You still gotta come cut my can down for me ...... I want an ickle can :smt041

Re: Stubbied Akrapovic
 

dont you lose BHP with a shorter can?

Re: Stubbied Akrapovic
 

Buy an already dinged can , sell your Akro on here or eBay , cut down other can , bobs yer uncle :D

Re: Stubbied Akrapovic
 

Hovis, I am a girlie I go for what looks good !! And my bike is just sitting there looking pretty, it wont see tarmac this year so hey may as well play with her LOL

Re: Stubbied Akrapovic
 

you'll soon be riding again shelly.