Pyramid Hugger fitting on a K6
 

Ive just tried fitting a pyramid rear hugger to my K6 pointy, but just cant get it to sit central.

The chain side is fine, lots of clearance etc, but the other side is a nightmare. it sits almost slightly lopsided and no matter how many adjustments i make to the bracket, or the tightness of the bolts, its defo not right.

Ive tried ringing Pyramid but no answer, so was wondering has anyone got any pics of a pyramid hugger fitted, showing the rear view(so i can see how far off the tyre it should be) and also the right hand side on view showing exactly where the bracket is fitted and if there is any angle on the fitment..

If anyone can help i would SERIOUSLY appreciate it, as its ****ing me off!!!:mad:

Re: Pyramid Hugger fitting on a K6
 

Re: Pyramid Hugger fitting on a K6
 

i find its best to fit the hugger then twist it straight then do up the bolts.

Re: Pyramid Hugger fitting on a K6
 

yours looks spot on, yet this just doesnt seem to want to fit like that, i dont get it at all!!

Have you got a pic from the right hand side on, looking behind the exhaust where the bracket is?

Re: Pyramid Hugger fitting on a K6
 

the hugger isnt on the bike at the moment but i'll look at my photos and see what i can find.

Re: Pyramid Hugger fitting on a K6
 

Really appreciate that mate! thanks! :)

In the meantime, anyone else, feel free to post any pics!! ta!

Re: Pyramid Hugger fitting on a K6
 

What a coincidence!

I've just come in from fitting a pyramid hugger to my K6.

I found I had to bend the Rear LHS mounting point to get mine to sit central.

And I also straightened out the bracket that they supply. I'll go take some pics.

Back in a min!:D

Re: Pyramid Hugger fitting on a K6
 

Ok, heres some pics:

http://img406.imageshack.us/img406/6...0019gk1.th.jpg

http://img74.imageshack.us/img74/2287/spa0022xa1.th.jpg

Re: Pyramid Hugger fitting on a K6
 

I had similar problems fitting the genuine Suzuki one. What I did in the end was use some washers on various holes to centralise the hugger. Looks spot on now.

Re: Pyramid Hugger fitting on a K6
 

KwakZZR, where did you get that double bubble from, if you don't mind me asking? Looks a better shape than mine.:cool:

Thanks.

Re: Pyramid Hugger fitting on a K6
 

Lawson, thats great, have you got any from the other side where the bracket is?

Or just showing where you bent the bracket?

I always thought Pyramid were meant to be spot on for fitment, but it seems a few of us are having probs....

Re: Pyramid Hugger fitting on a K6
 

Are these any better Ollie:

http://img411.imageshack.us/img411/9...0024lx9.th.jpg

http://img404.imageshack.us/img404/6...0025lm6.th.jpg

http://img107.imageshack.us/img107/9...0026qz0.th.jpg

The first picture shows the bracket I bent, so it is almost straight, that helped to make it sit central over my wheel.

Re: Pyramid Hugger fitting on a K6
 

those are brill mate! I owe you a beer! :D

what did you use to cut/remove the brake pipe clip thingy?

Re: Pyramid Hugger fitting on a K6
 

Ha Ha! No worries.

Erm? It did it ages ago, I think I took it off with the OE hoses. Its probably still attached to them in the garage somewhere.

Does it fit yet?:D

Re: Pyramid Hugger fitting on a K6
 

Well, i bent the bracket and it seems ok now, went for a quick ride , getting off to check it wasnt rubbing or moving out of position every now and then, and touch wood it seems ok.

Not quite what i was expecting though, i thought it would be fit and forget, but because of the poor fit and having to bend the bracket and angle it it to position, im always going to have to keep checking it as im worried it might move out of position and may rub my tyre...

Will have to see how it goes!

Thanks for the pics though, top man! :)

Re: Pyramid Hugger fitting on a K6
 

Now then ollie, is yours in black? I've got a black hugger coming. Is there any chance of a pic of the bike from each side so I can see what it looks like overall? Cheers.

Re: Pyramid Hugger fitting on a K6
 

Yes mate, ill try and do that for you tonight!:thumbsup:

Re: Pyramid Hugger fitting on a K6
 

Keith - hope these are ok;

http://images29.fotki.com/v1014/free...2007282-vi.jpg

http://images28.fotki.com/v997/free/...2007290-vi.jpg

http://images29.fotki.com/v1010/free...2007283-vi.jpg

http://images28.fotki.com/v998/free/...2007278-vi.jpg

http://images29.fotki.com/v1012/free...2007279-vi.jpg

http://images29.fotki.com/v1011/free...2007281-vi.jpg

And yes, im well aware that i need a decent aftermarket can!! :D

Re: Pyramid Hugger fitting on a K6
 

they are a good fit, its usually just a case of getting them lined up properly.

Re: Pyramid Hugger fitting on a K6
 

it needs too be colour coded

Re: Pyramid Hugger fitting on a K6
 

[-X I like it black :smt098

Re: Pyramid Hugger fitting on a K6
 

Agreed! Thanks for the pics, I've fitted mine now and I think I'm gonna stick with black as it seems to blend in with all the other black bits around it.

Re: Pyramid Hugger fitting on a K6
 

I fitted a Pyramid hugger to my K6 about 12 months ago.

It took an age to get sitting straight, but all I did was man-handle it into position - not very helpful I know!

The problem is with the metal bracket on the caliper side. Its a terrible design. The have easy access to a tapped hole on the top surface of the swing arm (where the rear brake hose was secured) and they chose to use a clamp type bracket that relies on pressure to keep it located. Crap design...and the rubber pads slide out from underneath the bracket too.

I almost went to a local fabrication company I know to make me a bracket that would locate on the tapped hole.

Re: Pyramid Hugger fitting on a K6
 

My thoughts exactly!!:smt021

As you have had your fitted a while, does yours pick up stones and other crap and drag it thru the hugger?

Just worried if it was anything sharp, it could slice the tyre!!:o

Re: Pyramid Hugger fitting on a K6
 

I do pick up stones but I havent had any problems with them getting stuck that I am aware of.

Re: Pyramid Hugger fitting on a K6
 

:rolleyes:Its not just me then!?

When riding slow, like pulling off the driveway, i noticed a few noises. So I stopped to take a look. Sure enough, stones! Theres probably about 3mm gap between the top of the tyre and hugger.

I'm sure it won't be a problem once they've squared off! :D:rolleyes: