Gear change problem-can't get past 2nd gear
On the way to work today about 5 mins away 3 loud clunks where heard at the bottom of the engine so took it easy and parked up at work was able to get the bike into neutral from top gear easily, now i find i can't get it past 2nd gear, it will select 1st neutral second like normal but won't go any further
Something tells me this is a biggy with the engine having to come out for a transmission overhaul, if that's the case the bikes of the road until next year :sad: , will have to get the dosh together for this one! probably will have to this! http://forums.sv650.org/showthread.php?t=95535 Its either the gear selector broke or a dropped fork! Gonna have to work out how people get the sv engine out Northy! help :smt088 |
Re: Gear change problem-can't get past 2nd gear
sorry about the multiposts!
|
Re: Gear change problem-can't get past 2nd gear
Getting it out's easy. Well, I say that, never actually done it but I've done everthing that's involved other than the actual drop, easy. Taking it apart, putting it back together, and having it not punch you in the face with a piston the first time you start it... That's not so easy.
But, it should be cheaper than you'd think, if you have a source of parts (me). I've never actually rebuilt an SV motor below the barrels, never got round to it with my spare, but if you fancy taking it on as a DIY job I'd be happy to help. Not sure that I have all the bits still, Richie got most of mine out of the decent engine, but the one with the spiders living in it might do the job. Have you considered option b? That's fit another engine, and break yours. You could probably get £200, £250 for the cams, tensioners, clutch, crank, cases and rods out of yours with any luck. |
Re: Gear change problem-can't get past 2nd gear
Electrical engineer by trade mate, pretty good at reverse enginnering stuff!
Things like this don't beat me, at the moment i'm trying to work our how people have got the engine out safely (winch or car jack only?) and transported / lifted the engine onto a workbench Amazes me how little there is to a sv engine when you see the pics posted on this site from a strip/rebuild |
Re: Gear change problem-can't get past 2nd gear
SV engine's small enough that I can lift it myself,and I'm feeble... Can't remember the weight, 40-50 kilos. I reckon balancing on a good quality jack, with you keeping it upright, is probably the way to go. It's built to sit on the sump, like most japanese engines.
|
Re: Gear change problem-can't get past 2nd gear
Cool! i think the tricky bit will be 'lining up' the engine once its ready to put back together so it fires in the right sequence and doesnt go boom like you said!
things like, dropping the engine and how to move the bike away etc... also would probably pick it up and put it onto a wooden surface for safety, but like i said i was freaking out at the prospect of having to take it out, strip it build it but ive got the positive head on over this now so thinking forwards! (especially by the thought of paying 700-1000 for a garage to do it!) |
Re: Gear change problem-can't get past 2nd gear
cheers for the PM.
yes one person can lift the engine out while another pulls the final bolt from the frame. As northy said if you have any probs or question then please just ask, I'll try my best to help / assist via the medium of the interweb type thingy... ;-) ps.. download the manual and have it printed out.... |
Re: Gear change problem-can't get past 2nd gear
hi I've just taken my engine out of mine. its not so hard but fitting it back in is a pain on your own. i had to get help from a passer by. if you need help give me a shout
|
Re: Gear change problem-can't get past 2nd gear
Quote:
|
All times are GMT. The time now is 01:58 PM. |
Powered by vBulletin® - Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.